ata1: port is slow to respond, this delay is known to occur on vacant
SATA ports
ata1: port failed to respond (30 secs)
ata1: SRST failed (status 0xFF)
ata1: SRST failed (err_mask=0x100)
ata1: softreset failed, retrying in 5 secs
ata1: SRST failed (status 0xFF)
ata1: SRST failed (err_mask=0x100)
ata1: softreset failed, retrying in 5 secs
ata1: SRST failed (status 0xFF)
ata1: SRST failed (err_mask=0x100)
ata1: reset failed, giving up
Since I don't have SATA drives, I don't need this to be checked.
How do I turn this off? Running CentOS 5.0 (just upgraded frm 4.x).
Enable SMART on BIOS setup.
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
