On Mon, 2007-06-25 at 18:08 -0500, Barry Brimer wrote: > > My question is, how can I tell anaconda to set the NIC interface options > > such as speed and duplex? I have another server to install which has 2 x > > gigabit NICs and 2 x 100MB NIC's. My concern is that anaconda will again > > use wrong NIC parameters, and the installation will again be very slow. > > Surely it is possible to set the NIC options? > > On the boot line, use the following to set your first ethernet interface to > use > 100Mb/s full-duplex ethernet: > > eth0_ethtool="autoneg=off speed=100 duplex=full" > Okay, that seems easy enough :-) Thanks. However, is the anaconda NIC ordering the same as those listed by the bios? For a mixed NIC server it could be important.
John. -- --------------------------------------------------------------- John Horne, University of Plymouth, UK Tel: +44 (0)1752 233914 E-mail: [EMAIL PROTECTED] Fax: +44 (0)1752 233839 _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
