Sounds good. Imagedisk however produces imd files, need to then convert to imd files with the imdu /b command.
Cz On May 14, 2023 9:58:31 AM EDT, Warner Losh via cctalk <cctalk@classiccmp.org> wrote: >On Sun, May 14, 2023, 7:47 AM Chris Zach via cctalk <cctalk@classiccmp.org> >wrote: > >> Hi! >> >> Well, after a good bit of work I have finally gotten my Compaq XE4000 up >> and running with Windows 98, the BIOS all set, a new battery, and of >> course a 1.2mb 5.25 floppy that seems to be working. >> > >I'd avoid teledisk. I'd look at Dave Dunfield's ImageDisk. It produces >those img files directly. It's linked from >http://dunfield.classiccmp.org/img/index.htm > >I'd now like to start sucking the rare images I have here on RX50 into a >> TD0 format which can be converted to a .IMG format which can then be >> used on the mighty GoTek's to allow people to run such operating systems >> as: >> >> Micro RSTS 2.1 >> Micro RSX (I forget the exact version) >> Micro-11 Maint disks >> Ultrix 11 Version 2.0 (all 30 disks) >> > >Oh, these are interesting. > >http://www.bitsavers.org/bits/DEC/pdp11/floppyimages/rx50/ > >Has some interesting goodies too, but none of these excrpt maybe yhe Micro >RSTS stuff. Maybe if you get them imaged, you could send them to Al. > >If you are in Denver by chance, I'd be happy to help image these too. > >Warner > >Before I start popping these in I have a question: I just did a test >> using an XXDP floppy and the message I got included >> Single sided, double density >> Interleave 1:1 >> Sector Size is 512 >> >> And then for each track from 1 to 82 (?) it said >> "Data, No ID adding sector 110" >> >> Is this right? Something else I might need to do for reading RX50's? >> > > > >Thanks! >> CZ >>
