This week, I scored four Olympia boxes - an ETX I, an ETX II and two EX 100s.
Googling has not been very fruitful. I have established that the ETX II and the EX 100 are CP/M machines, SSDD 48 tpi 5.25" and DSDD 48 tpi 5.25" respectively and have seen one assertion that the ETX II is S-100 based - I won't be able to confirm that until I open it up. I found nothing on the ETX I. It doesn't seem to have a floppy drive, so may not be a CP/M box. I guess I'll have to power it on and see if it gives me a clue as to what's in the firmware. As best I can figure out, these were sold as add ons for electric typewriters. You hooked them up, with they typewriter acting as keyboard and printer and you had a word processor or computer. I think I have one interface board, that came in a box with the EX I. Does anybody know anything about these machines? It seems like a boot disk from an Osborne One would work. Most immediately, though, does anybody know which typewriters they worked with? I have an opportunity to go back to where I got them, today and it would be great if I didn't have to haul off every damn typewriter with "Olympia" on it! Thanks -- Robert