Jonathan may be on to something here. I only deal with Sun stuff and am
mostly unfamiliar with SGI stuff. However, I use LCD displays with
13W3-to-VGA adapters on my Suns and, relevant to this discussion, I know
that the adapters used with Suns are different from the ones with SGIs,
though I don't know the details.
alan
On 1/9/18 4:01 PM, systems_glitch via cctech wrote:
Bill,
Are you sure the SGI monitor will work with the Sun graphics adapter? Just
because the plug fits doesn't mean the monitors are compatible, when it
comes to 13W3. It may be just transferring control to the video console and
*appear* to be locking up, and you're not getting anything out of the
display as a result.
Do you get diagnostic LED patterns on the keyboard LEDs?
Thanks,
Jonathan
On Tue, Jan 9, 2018 at 4:18 PM, william degnan via cctech <
cct...@classiccmp.org> wrote:
Working from this page to configure my sparcstation 10 after NVRAM
replacement:
http://www.obsolyte.com/sunFAQ/faq_nvram.html
...but curious is there an installation manual or whatever specific to the
video card in my system, a TurboXGX with STP3010GPA chip
http://vintagecomputer.net/sun/SparcStation-10/Sun_STP3010PGA_TURBOXGX.jpg
I have Solaris 4 installed. I am guessing around trying different things.
With help I have the OS installed but so far I can't get the system to
recognize the video card and Sun keyboard. With these installed it freezes
the system...so, I am using a serial terminal to interact with the system.
The video display I have is an SGI GDM-20D11
Eventually I'll poke through to the solution, this is my first Sun box, up
to this point they were "too new" but I'd like to learn how to perform a
system install.
If I find the answers I am looking for I'll post here.
Bill
