My 11/34 and 11/10 would be very happy to have one of these each . Doug Jackson
On 25 October 2016 5:28:05 am AEDT, Scott Baker <scott.l.ba...@gmail.com> wrote: >Hi Noel, > >>> Any chance it could be put into 'production'? >Sure, if there is interest, I could make a run of boards. > >>> Also, what FPGA board are you using? I assume it's one that has an >SD >>> card socket or something, for actually storing the bits on? > >My project is just an interface board for an existing RL02 emulator >project: www.pdp11gy.com There are a multiple project revisions listed >on >the pdp11gy.com site that use different Altera FPGA dev boards: DE0 >Nano, >DE0 Nano SOC, and BeMicro CV. > >I was planning to use a Terasic DE0 Nano dev board since these boards >can >be found on eBay from $50 to $100. The DE0 nano does not have an >micro-SD >card socket which is why there is a socket on my interface board. >http://sierracircuitdesign.ddns.net/temp/RL02 > >The DE0 Nano SOC, and BeMicro CV dev boards have micro-SD card sockets, >so >if you used one of those, then you would not need to populate the >micro-SD >socket on the interface board. According to the author of the >www.pdp11gy.com RL02 project, the 40-pin headers on DE0 Nano, DE0 Nano >SOC, >and BeMicro CV are compatible, so you could use my interface board with >any >of these boards. > >Regards, >Scott -- Sent from my Android device with K-9 Mail. Please excuse my brevity.
