> I would hope whoever gets it is prepared to exchange information. There is no
> software with my machine, of course.
Pete,
Congrats! Once you pick up the system feel free to contact me about
getting copies of the limited software I have for the MINC at this time. They
are great systems to experiment with.
Mark Matlock
>
> In case anyone is worried I am keeping 2 MINCs myself. One is an RL01-based
> one that I have pulled the CPU, RAM and Bootstrap cards from and hung it off
> a DW11-B (Unibus-Qbus interface) on a PDP11/45 (yes, that does work!). I've
> not
> got the 11/45 running after the house move, but it is all there and sorting
> it out
> is just a matter of time The other MINC is a MINC-23 (PDP11/23 CPU board),
> with an RX02. I am also keeping at least one of every MINC module I have
> ever owned, including MNCAG (analogue preamplifier) and MNCTP
> (thermocouple interface).
Tony,
Using a DW11-B to connect the MINC to a PDP-11/45 sounds fantastic! What a
neat idea! I have all the MINC modules except the MNCTP thermocouple interface
and the MNCAM analog mux. With the modified BDV11 I've been able to boot 11/03,
11/23 and 11/73 CPUs. I run either RT-11 and RSX11M by changing MicroSD cards
on the UC07 / SCSI2SD drives (configured as 4 150 MB drives). I understand some
MINC-23s ran RSX and would love to find any drivers for RSX and the MINC
modules.
Mark Matlock
