Hi
Further to my posts this morning I have one last hurdle to jump.
1. I have a VAX with a TK70 attached and a TQK70 controller.
2. The tape drive works just fine.
3. Also on the VAX I have the correct tape (.TAP) image file for a
RSTS/E V10 install tape.
4. I would like to copy the .tap file to the tape so as to end up with a
bootable install tape.
5. I then power down the VAX and move the controller to an 11/83. (The
drive is external with its own PSU)
6. Boot the install tape and go from there.
So suggestions please as to how to do 4.
Rod Smallwood
