Hey Matt, Well been a few days, but did you ever resolve this? I am sure you have heard about the stories of rebooting so always keep that in mind :)
On Sat, Mar 27, 2010 at 11:45 PM, Matt Hill <[email protected]> wrote: > Hi There, > > Trying do do the exporting into other VRFs here, but it is not > working. All of the routes are appearing in R5's routing table when > they should not be. > > R5: > ! > ip vrf GREEN > rd 100:1 > route-target export 100:2 > route-target import 100:2 > route-target import 100:1 > route-target import 100:100 <------ want to see these > ! > ! > ! > ! > ! > ! > interface FastEthernet0/0 > ip vrf forwarding GREEN > ip address 150.50.55.5 255.255.255.0 > speed 100 > full-duplex > ! > ! > router bgp 100 > no bgp default ipv4-unicast > bgp log-neighbor-changes > neighbor 200.0.0.2 remote-as 100 > neighbor 200.0.0.2 update-source Loopback0 > ! > address-family ipv4 > neighbor 200.0.0.2 activate > no auto-summary > no synchronization > exit-address-family > ! > address-family vpnv4 > neighbor 200.0.0.2 activate > neighbor 200.0.0.2 send-community extended > exit-address-family > ! > address-family ipv4 vrf GREEN > redistribute connected > no synchronization > exit-address-family > ! > ip forward-protocol nd > ! > ! > no ip http server > no ip http secure-server > > > ! > ! > ! > R5#show ip route vrf GREEN > > Routing Table: GREEN > Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP > D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area > N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 > E1 - OSPF external type 1, E2 - OSPF external type 2 > i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 > ia - IS-IS inter area, * - candidate default, U - per-user static > route > o - ODR, P - periodic downloaded static route > > Gateway of last resort is not set > > 100.0.0.0/24 is subnetted, 2 subnets > B 100.100.100.0 [200/0] via 200.0.0.2, 00:09:34 > B 100.100.200.0 [200/0] via 200.0.0.2, 00:09:34 <---- dont > want to see this one > 200.0.0.0/32 is subnetted, 1 subnets > B 200.0.0.1 [200/0] via 200.0.0.2, 00:09:34 > 150.50.0.0/24 is subnetted, 2 subnets > C 150.50.55.0 is directly connected, FastEthernet0/0 > B 150.50.12.0 [200/0] via 200.0.0.2, 00:09:34 > R5# > > > Now for R2 > ! > ip vrf RED > rd 100:1 > export map 100 > route-target export 100:1 > route-target import 100:1 > route-target import 100:2 > ! > > interface FastEthernet1/0 > no switchport > ip vrf forwarding RED > ip address 150.50.12.2 255.255.255.0 > duplex full > speed 100 > ! > router bgp 100 > no bgp default ipv4-unicast > bgp log-neighbor-changes > neighbor AS100 peer-group > neighbor AS100 remote-as 100 > neighbor AS100 update-source Loopback0 > neighbor 150.50.12.1 remote-as 10000 > neighbor 200.0.0.4 peer-group AS100 > neighbor 200.0.0.5 peer-group AS100 > neighbor 200.0.0.6 peer-group AS100 > ! > address-family ipv4 > neighbor 200.0.0.5 activate > no auto-summary > no synchronization > exit-address-family > ! > address-family ipv4 multicast > neighbor AS100 route-reflector-client > neighbor 200.0.0.4 activate > neighbor 200.0.0.6 activate > no auto-summary > no synchronization > exit-address-family > ! > address-family vpnv4 > neighbor AS100 send-community extended > neighbor 200.0.0.5 activate > exit-address-family > ! > address-family ipv4 vrf RED > neighbor 150.50.12.1 remote-as 10000 > neighbor 150.50.12.1 activate > no synchronization > exit-address-family > ! > ip prefix-list 100 seq 5 permit 100.100.100.0/24 > ! > ip prefix-list 200 seq 5 permit 100.100.200.0/24 <---match this > ! > route-map 100 permit 10 > match ip address prefix-list 100 > set extcommunity rt 100:100 > ! > route-map 100 permit 20 > match ip address prefix-list 200 <------ match this > set extcommunity rt 100:200 <---- I am not importing this on R5 > ! > route-map 100 permit 30 > set extcommunity rt 100:1 > ! > > > it appears that my export map is not tagging the extcommunity 100:100 > & 100:200 for some reason... > > R5#show ip bgp vpnv4 vrf GREEN 100.100.200.0 > BGP routing table entry for 100:1:100.100.200.0/24, version 7 > Paths: (1 available, best #1, table GREEN) > Not advertised to any peer > 10000 > 200.0.0.2 (metric 65) from 200.0.0.2 (200.0.0.2) > Origin IGP, metric 0, localpref 100, valid, internal, best > Extended Community: RT:100:1 > mpls labels in/out nolabel/22 > R5#show ip bgp vpnv4 vrf GREEN 100.100.100.0 > BGP routing table entry for 100:1:100.100.100.0/24, version 6 > Paths: (1 available, best #1, table GREEN) > Not advertised to any peer > 10000 > 200.0.0.2 (metric 65) from 200.0.0.2 (200.0.0.2) > Origin IGP, metric 0, localpref 100, valid, internal, best > Extended Community: RT:100:1 > mpls labels in/out nolabel/21 > > > Anyone know why? > > > Cheers, > Matt > > CCIE #22386 > CCSI #31207 > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > -- Bryan Bartik CCIE #23707 (R&S, SP), CCNP Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
