Task 11..
Everything looks ok except the final ping fails:
R9#show ip pim rp
Group: 239.2.2.2, RP: 200.0.0.8, v2, uptime 00:06:27, expires never
Group: 224.0.1.40, RP: 200.0.0.8, v2, uptime 00:06:38, expires never
R9#show ip mroute
IP Multicast Routing Table
Flags: D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C - Connected,
L - Local, P - Pruned, R - RP-bit set, F - Register flag,
T - SPT-bit set, J - Join SPT, M - MSDP created entry,
X - Proxy Join Timer Running, A - Candidate for MSDP Advertisement,
U - URD, I - Received Source Specific Host Report,
Z - Multicast Tunnel, z - MDT-data group sender,
Y - Joined MDT-data group, y - Sending to MDT-data group
Outgoing interface flags: H - Hardware switched, A - Assert winner
Timers: Uptime/Expires
Interface state: Interface, Next-Hop or VCD, State/Mode
(*, 239.2.2.2), 00:06:30/stopped, RP 200.0.0.8, flags: SPF
Incoming interface: FastEthernet0/0, RPF nbr 150.50.59.5
Outgoing interface list: Null
(150.50.59.9, 239.2.2.2), 00:06:30/00:01:12, flags: PFT
Incoming interface: FastEthernet0/0, RPF nbr 0.0.0.0, Registering
Outgoing interface list: Null
(*, 224.0.1.40), 00:17:46/00:02:53, RP 200.0.0.8, flags: SJPCL
Incoming interface: FastEthernet0/0, RPF nbr 150.50.59.5
Outgoing interface list: Null
R9#ping 239.2.2.2
Type escape sequence to abort.
Sending 1, 100-byte ICMP Echos to 239.2.2.2, timeout is 2 seconds:
.
R9#ping 200.0.0.8
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 200.0.0.8, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 48/117/184 ms
R9#
Now the bit that throws me is the "outgoing interface null" for
239.2.2.2. The word "stopped" does not look to great either... But I
also see that on R8 which is the RP
Is this my problem? I can ping 239.2.2.2 from R8 (which is local) but
not from R9.
Cheers,
Matt
CCIE #22386
CCSI #31207
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
