Hi,
I am stuck with a problem. In the below topology;
CE1------PE1----- MPLS---- PE2----CE2
CE1 is sending OSPF type-5 external LSA (generated by a redistributing
specific loopback IP) and i could see this lsa in PE1's ospf database. But,
not in BGP vpnv4 table. Is this expected behavior? I though as the tag=0,by
default, E2 routes are not redistributed into BGP vpnv4. tried with changing
tag value to 100 and still no success.
Below is the configuration;
<snip from R0-CE1>
Type-5 AS External Link States
Link ID ADV Router Age Seq# Checksum Tag
22.22.22.22 100.100.100.100 463 0x80000001 0x003B17 100
<From R1 - PE1>
OSPF 1 VRF
Type-5 AS External Link States
Link ID ADV Router Age Seq# Checksum Tag
22.22.22.22 100.100.100.100 715 0x80000001 0x003B17 100
R2#
!
address-family ipv4 vrf one
redistribute ospf 2 vrf one
no synchronization
exit-address-family
R2#
R2#show ip bgp vpnv4 vrf one <*<< not seeing type-5 LSA*
BGP table version is 50, local router ID is 2.2.2.2
Status codes: s suppressed, d damped, h history, * valid, > best, i -
internal,
r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 1:1 (default for vrf one)
*> 11.1.1.0/24 0.0.0.0 0 32768 ?
*> 12.1.1.0/24 0.0.0.0 0 32768 ?
*>i13.1.1.0/24 5.5.5.5 0 100 0 ?
*>i13.1.2.0/24 5.5.5.5 0 100 0 ?
*> 100.100.100.100/32
12.1.1.2 2 32768 ?
*>i192.168.2.0 5.5.5.5 2 100 0 ?
R2#
Thanks,
Venkat
http://ippoint.wordpress.com/
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
