Hi, i tried using the route-map with ACL and redistributing with BGP it did not work
i am trying simple setup. R1 is connected to R2 and R3 R2 is connected to R3 and R5 R3 is connected to R2 and R5 R2,R3,R5 is full mesh. lets say R1,R2,R3 is as 10 and R5,R6 is in AS 1010 all routes from AS10 should take R3 primary path to BB and R2 primary to AS 1010 the routes are flipping.i used ACL to deny the routes and matched that into route-map then redistributed. let me know the status. all the routes are in sh ip bgp Thanks GP On Mon, Mar 15, 2010 at 16:29, matt reath <[email protected]> wrote: > A standard ACL and route-map should do the trick. If thats not working > please post the config you are using and verify the routes exist in the BGP > table. 'sh ip bgp' > > On Mon, Mar 15, 2010 at 6:54 AM, Praveen g <[email protected]> > wrote: >> >> Hi, >> what is the best way to filter routes in ISIS when redistributing BGP >> Ofcourse, you can use route-map with prefix-list or ACL or metric >> i tried doing some sample lab but nothing worked. >> can any one let me know how to enable >> Thanks >> G Praveen >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
