When you enable this function, DS-bit in Type-3 LSAs is ignored. -- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert
Mailto: [email protected] Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Web: http://www.ipexpert.com/ On Sun, Mar 14, 2010 at 20:25, venkat <[email protected]> wrote: > Hi Experts, > Here is a simple topology; > CE1-----PE1----MPLS n/w----- PE2------CE2 > OSPF(area 0) is running between PE and CE. As expected, i could see the > loopback IP (advertise via ospf) of CE1 in CE2 as "IA" summary routes. > When i enabled "capability vrf-lite" command on PE2, the same routes are > appeared as "E2" routes in CE2. The cisco CLI document doesnt give much info > about this type conversation. Could you please explain what really going on > after enabling "capability vrf-lite" > R6 is CE2. > R6#show ip route ospf > 100.0.0.0/32 is subnetted, 1 subnets > O IA 100.100.100.100 [110/3] via 13.1.2.1, 00:01:43, FastEthernet0/0 > 12.0.0.0/24 is subnetted, 1 subnets > O IA 12.1.1.0 [110/2] via 13.1.2.1, 00:01:43, FastEthernet0/0 > 13.0.0.0/24 is subnetted, 2 subnets > O 13.1.1.0 [110/2] via 13.1.2.1, 00:01:43, FastEthernet0/0 > R6# > R6# > R6# > *Mar 1 02:41:11.043: %OSPF-5-ADJCHG: Process 1, Nbr 13.1.2.1 on > FastEthernet0/0 from LOADING to FULL, Loading Done > R6# > R6# > R6#show ip route ospf > 100.0.0.0/32 is subnetted, 1 subnets > O E2 100.100.100.100 [110/2] via 13.1.2.1, 00:01:12, FastEthernet0/0 > 12.0.0.0/24 is subnetted, 1 subnets > O E2 12.1.1.0 [110/1] via 13.1.2.1, 00:01:12, FastEthernet0/0 > 13.0.0.0/24 is subnetted, 2 subnets > O 13.1.1.0 [110/2] via 13.1.2.1, 00:01:12, FastEthernet0/0 > R6# > > Thanks, > Venkat > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
