It indeed looks like you are using a wrong rack. The labs are made for 2 different types of racks, please watch carefully which rack you need for a specific lab.
The 7200 pod only has 1 Catalyst switch and the other SP pods have 4 switches. -- Regards, Rick Mur CCIE2 #21946 (R&S / Service Provider) Sr. Support Engineer – IPexpert, Inc. URL: http://www.IPexpert.com On 16 dec 2009, at 09:43, Lala Lander wrote: > Rick, > > Please help me out here. What Proctor lab rack maps this workbook topology? I > am looking at initial configs and for example router 1 and 2 both need 2 > ethernet interfaces but my routers have only 1 ethernet interfaces. Also I > need two cat switches but there is no second cat switch in the POD. This is > really annoying as during lab session, you are just struggling with physical > topology issues and real work has not even started. Please help as I am > giving up today but I dont want to waste my tomorrow's session. BTW I am > using 7200 rack for SP because last time i had similiar issues with other SP > pod. > > 2009/10/31 Rick Mur <[email protected]> > Hi Andre, > > I guess the entire Volume 2 is awesome! Only lab 1 has some small problems > where things are not really coming up correctly. Try any other lab like lab 3 > or 4. They are really good, focus on the entire blueprint and will get you > well prepared. > > Goot luck on your exam Friday!!! > > > -- > > Regards, > > Rick Mur > CCIE2 #21946 (R&S / Service Provider) > Sr. Support Engineer – IPexpert, Inc. > URL: http://www.IPexpert.com > > On 30 okt 2009, at 12:51, André Luiz Bernardes wrote: > >> Yes Shai, I had this problem yesterday on my second attempt for Section1 >> lab... my workaround was exactly what Rick said...frame-relay on interfaces >> Serial4/0 using standard DLCIs (205/502). Actually I had a couple of other >> problems thru workbook 2 that I can recall now. I almost got crazy with OSPF >> redistribuition on Section 5. I spent 2 linked sessions on vRack for this >> lab. My exam is on next Friday so I have few time to repeat some Labs and >> review other stuff. I will share with you all if I find something else >> strange with IPE workbooks. >> >> >> Rick >> I dont have too much time now... would you suggest any section on workbook >> 2 to focus??? any other suggestion besides workbook is appreciated. >> >> Thanks >> Andre >> >> On Fri, Oct 30, 2009 at 8:25 AM, Rick Mur <[email protected]> wrote: >> Hi Shai, >> >> We are aware of this mistake in lab 1. >> As a workaround please use a frame-relay PVC instead. Don't do anything >> fancy with bridging, just take the Frane-Relay PVC from R2 to R5. >> >> We will make sure to fix it with the next update round.F >> >> >> -- >> >> Regards, >> >> Rick Mur >> CCIE2 #21946 (R&S / Service Provider) >> >> Sr. Support Engineer – IPexpert, Inc. >> URL: http://www.IPexpert.com >> >> On 30 okt 2009, at 07:22, Shai Loufton wrote: >> >>> Hello all, >>> This has been discussed before – but even though I have looked at all my >>> emails regarding this I could not get this to work. >>> To make a long story short – the base connectivity of the 7200/ATM rack >>> shows R2 connected to R4 connected to R5 , while the SP Volume II lab 1 >>> uses a R2-R5 link which isn't there. >>> It was recommended before to use frame-relay bridging on R4 to simulate >>> that link in order to make the base connectivity work – but I could not. >>> I also tried PPP as someone mentioned in a previous thread – couldn't make >>> that work either. >>> I reverted the POD and moved to lab 2 on VOL II – and plan to retake this >>> lab tomorrow. >>> >>> If anyone been through this and has a working config of R2-R4-R5 that >>> simulates a direct link between R2 and R5 – please share it.. >>> >>> IPexpert team – I think someone from your side should at least think about >>> publishing a workaround for this as this breaks the L2 connectivity of the >>> lab and thus can lead to many many hours of frustration ….. >>> >>> >>> Shai L >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> >> > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
