Still weird stuff that the command is accepted than, but just doesn't work. I really hate 12.2S, would love to see 12.0S instead in the SP lab.
-- Regards, Rick Mur CCIE2 #21946 (R&S / Service Provider) Sr. Support Engineer – IPexpert, Inc. URL: http://www.IPexpert.com On 6 sep 2009, at 23:05, Rich Collins wrote: > I read on Antonio Soares web site that he noticed that it was not > supported on 12.2S but was on 12.0. It does work on the load that I > have on my Dynamips. > > 7200 Software (C7200-JS-M), Version 12.3(21) > > > PE1# > interface FastEthernet0/0 > ip vrf forwarding BLUE > ip vrf sitemap SITEMAP > ip address 12.12.12.2 255.255.255.0 > ip pim sparse-mode > duplex half > no clns route-cache > > > router eigrp 1 > auto-summary > ! > address-family ipv4 vrf BLUE > redistribute bgp 1 metric 1 1 1 1 1 > network 12.0.0.0 > no auto-summary > autonomous-system 100 > exit-address-family > ! > > > ! > route-map SITEMAP permit 10 > set extcommunity soo 300:1 > > > > > PE1#sh ip route vrf BLUE 11.11.11.11 > Routing entry for 11.11.11.11/32 > Known via "eigrp 1", distance 90, metric 156160, type internal > Redistributing via bgp 1, eigrp 1 > Advertised by bgp 1 metric 20 > Last update from 12.12.12.1 on FastEthernet0/0, 00:19:19 ago > Routing Descriptor Blocks: > * 12.12.12.1, from 12.12.12.1, 00:19:19 ago, via FastEthernet0/0 > Route metric is 156160, traffic share count is 1 > Total delay is 5100 microseconds, minimum bandwidth is 100000 > Kbit > Reliability 255/255, minimum MTU 1500 bytes > Loading 1/255, Hops 1 > > PE1# > > PE1#sh ip bgp vpnv4 all 11.11.11.11 > BGP routing table entry for 1:1:11.11.11.11/32, version 6 > Paths: (1 available, best #1, table BLUE) > Advertised to non peer-group peers: > 2.2.2.2 > Local > 12.12.12.1 from 0.0.0.0 (1.1.1.1) > Origin incomplete, metric 20, localpref 100, weight 32768, > valid, sourced, best > Extended Community: SoO:300:1 RT:1:1 0x8800:32768:0 > 0x8801:100:130560 0x8802:65281:25600 0x8803:65281:1500, > mpls labels in/out 17/nolabel > PE1# > > > -Rich > > > > > > > > On Sun, Sep 6, 2009 at 2:11 PM, Rick Mur<[email protected]> wrote: >> It definitely is supported. As you saw the command is accepted, but >> it >> may take a few resets or clears before you see it. >> >> Or you ran into a bug again :-P 12.2S is quite buggy as you noticed. >> >> -- >> >> Rick Mur >> CCIE2 #21946 (R&S, Service provider) >> Sr. Support Engineer -- IPexpert, Inc. >> >> Sent from my iPhone >> >> On 6 sep 2009, at 18:44, Bryan Bartik <[email protected]> wrote: >> >>> Hello, >>> >>> Is EIGRP SoO supported on the SP Lab IOS? I looked in the Feature >>> Navigator and it doesn't appear so. I am doing a practice lab and >>> the soo community is not getting set, wondering if it is because it >>> doesn't work or I have configured something wrong. >>> >>> IOS is 7200 Software (C7200-P-M), Version 12.2(18)S2, RELEASE >>> SOFTWARE (fc2) >>> >>> interface FastEthernet0/0.701 >>> encapsulation dot1Q 701 >>> ip vrf forwarding SITE3 >>> ip vrf sitemap SITE3 >>> >>> route-map SITE3 permit 10 >>> set extcommunity soo 100:3 >>> >>> R7#sho ip route vrf SITE3 30.30.30.30 >>> Routing entry for 30.30.30.30/32 >>> Known via "eigrp 200", distance 90, metric 156160, type internal >>> Redistributing via bgp 100, eigrp 200 >>> Advertised by bgp 100 >>> Last update from 70.0.101.2 on FastEthernet0/0.701, 00:07:21 ago >>> Routing Descriptor Blocks: >>> * 70.0.101.2, from 70.0.101.2, 00:07:21 ago, via >>> FastEthernet0/0.701 >>> Route metric is 156160, traffic share count is 1 >>> Total delay is 5100 microseconds, minimum bandwidth is 100000 >>> Kbit >>> Reliability 255/255, minimum MTU 1500 bytes >>> Loading 1/255, Hops 1 >>> >>> But no soo value: >>> >>> R7#sho ip bgp vpnv4 all 30.30.30.30 >>> BGP routing table entry for 700:3:30.30.30.30/32, version 108 >>> Paths: (1 available, best #1, table SITE3) >>> Advertised to update-groups: >>> 1 >>> Local >>> 70.0.101.2 from 0.0.0.0 (100.254.254.7) >>> Origin incomplete, metric 156160, localpref 100, weight 32768, >>> valid, sourced, best >>> Extended Community: RT:700:3 0x8800:32768:0 0x8801:200:130560 >>> 0x8802:65281:25600 0x8803:65281:1500 >>> >>> -- >>> Bryan Bartik >>> CCIE #23707 (R&S), CCNP >>> Sr. Support Engineer - IPexpert, Inc. >>> URL: http://www.IPexpert.com >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, >>> please visit www.ipexpert.com >> >> _____________________________________________________________________ >> Subscription information: http://www.groupstudy.com/list/comserv.html >> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
