Gday Jo, I've been "tweaking" my .net file as I prepare each of the new Vol2 labs. I've completed labs 1 - 4 to date and I've had to make changes along the way to properly reflect the physical topology, as well as add in the correct VPI/VCIs.
I'm happy to unicast you what I've used for Vol2 Lab1 - 4 if you like? Cheers, Con. On Fri, Aug 7, 2009 at 5:58 AM, Jo Knight<[email protected]> wrote: > Hi All, > > Im just getting into the SP workbooks and am using the .net file for the ATM > rack from my members account. > > I have a couple of questions about the ATM PVC settings > > Firstly, I think that the values were the wrong way around in the ones I > downloaded so I flipped them to what I have below. I had previously been > trying to use pvc 0/32, but this didnt work until I flipped the values in > the .net file. > > [[ATMSW ATM-SWITCH]] > 1:0:32 = 2:0:32 > 1:0:100 = 2:0:101 > 2:0:32 = 1:0:32 > 2:0:101 = 1:0:100 > > Will these ATM-SWITCH settings be enough for the Volume 2 labs, or is there > a more comprehensive list of what needs to be used (similar to the FR-SWITCH > with a full mesh of connections). I noticed that in the files only R1 and R2 > have ATM connections, but in the diagram it shows all routers with an ATM > connection. > > Is anyone using the Dynamips .net files for their studies that has come > across these? > > I also have a stack of PL sessions, but wanted to get my Dynamips setup in > the same way so I can do ad hoc lab sessions. > > Thanks, > Jo > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
