Victor, that is what I expected to see! I am running c3825-adventerprisek9-mz.124-22.T.bin....strange
On Mon, Jun 15, 2009 at 1:16 PM, Victor Cappuccio <[email protected]>wrote: > Hi, ok I bite here, since I can see more options, so is there any catch :) > > > Router(config)#$ binding ipv4 10.1.1.0 255.255.255.0 output 172.1.0.2 ? > <16-1048575> Label Value <16 - 1048575> > explicit-null IETF MPLS IPv4 explicit null label (0) > implicit-null IETF MPLS implicit null label (3) > tag-explicit-null Cisco tag-switching explicit null label (0) > tag-implicit-null Cisco tag-switching implicit null label (1) > > So you can imagine what to do with the input label > > - 0, IPv4 Explicit Null Label—This value is legal only when it is the > sole label entry (no label stacking). It indicates that the label must be > popped upon receipt. Forwarding continues based on the IPv4 packet. > - 1, Router Alert Label—When a packet is received with a top label > value of 1, it is delivered to the local software module for processing. > - 2, IPv6 Explicit Null Label—This value is legal only when it is the > sole label entry (no label stacking). It indicates that the label must be > popped upon receipt. Forwarding continues based on the IPv6 packet. > - 3, Implicit Null Label—This label is used in the control protocol > (LDP, RSVP) only to request label popping by the downstream router. It > never > actually appears in the encapsulation. Labels with a value of 3 should not > be used in the data packet as real labels. No payload type (IPv4 or IPv6) > is > implied with this label. > - 4 through 15—Unassigned. -- But hey can we think in something to do > here :) j/k > > > > thanks > Victor.- > > > On Mon, Jun 15, 2009 at 7:34 PM, Bryan Bartik <[email protected]>wrote: > >> Hello, >> >> I am trying to assign some static labels but as you can see here, I have >> none available: >> >> R2#sho mpls label range >> Downstream Generic label region: Min/Max label: 16/10000 >> >> R2#conf t >> Enter configuration commands, one per line. End with CNTL/Z. >> R2(config)# >> R2(config)#mpls stat bind ipv4 1.1.1.1 255.255.255.255 ? >> <16-0> Label Value <16 - 0> >> input Incoming (local) label >> output Outgoing (remote) label >> >> >> The range is 16 to 0 and of course does not let me assign any value...any >> ideas? >> >> -- >> Bryan Bartik >> CCIE #23707 (R&S), CCNP >> Sr. Support Engineer - IPexpert, Inc. >> URL: http://www.IPexpert.com >> >> _____________________________________________________________________ >> Subscription information: http://www.groupstudy.com/list/comserv.html >> > > > > -- > Victor Cappuccio > CCIE R/S# 20657 > CCSI# 30452 > www.anetworkerblog.com > www.linkedin.com/in/vcappuccio > -- Bryan Bartik CCIE #23707 (R&S), CCNP Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com
