Hello, I have a pretty basic mVPN scenario trying to get going. My topology is:
CE1----PE1----P1----PE2----CE2 The BGP-MPLS VPN works fine. I can ping from CE1 loopback (192.168.0.1) to CE2 loopback (192.168.0.2). After I join a group with ip igmp-join (233.0.0.1) on CE1, I cannot ping from CE2. This group shows up in the VRF OIL on PE1 but PE1 never sends a PIM join up to PE2 and to the RP. Should there be an adjacency across the MTI? As of now, I do not have one. Here is what I have enabled: -Multicast-routing and PIM-SM on the P-cloud routers and interfaces with static RP of P1 loopback -Multicast-routing and PIM-SM on the PE VRFs and CE routers with CE2 loopback as the RP -Default MDT of 239.0.0.1 under the VRFs on both PEs. Any ideas where to continue troubleshoooting? Thank you, Bryan Bartik CCIE #23707 (R&S), CCNP Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com
