Yes, it will be available in the lab. It is below product.
Your link will also work. Just be sure to memorize those missing protocols. i.e ipv6 = 0x86DD Also if you need to find an uncommon port number (to protocol), we can get a full-list with this command show ip nbar port-map For example, result for port 1433: port-map sqlserver tcp 1433 ________________________________ From: Christopher Lemish <[email protected]> Sent: Friday, October 25, 2013 1:41 PM Subject: RE: [OSL | CCIE_RS] DocCD: EtherType Values Thank you Mark! Do we know if R&S candidates have access to this path during the lab exam even though this is under Wireless? Thank you, Chris Christopher Lemish, CCNP/MCSE Network Consulting Engineer | CDW Phone: 732.982.0074 | Mobile: 646.276.3466 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mark B Sent: Thursday, October 24, 2013 7:16 PM To: [email protected] Subject: Re: [OSL | CCIE_RS] DocCD: EtherType Values It is under Wireless Access Points. Products >> Wireless >> Access Points >> Aeronet XXXX >> Config...Guide.... APPENDIX A: PROTOCOL FILTERS Be aware, that it is missing a couple of important types (must memorize): IPv6 = 0x86DD STP = 0x4242 STP lsap = 0xaaaa _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
