Hello Team,
I configure the following topology to play with the routing redistribution.
I want to achieve the following.
Routing Redistribution Point are R5, R6 and R11
On R5 we are redistributing from RIP to OSPF, EIGRP 200 to OSPF, and from
OSPF to EIGRP 200 and OSPF to RIP.
On R6 I am redistributing from EIGRP 200 into RIP and from RIP into EIGRP
200.
On R11 from OSPF into EIGRP 200 and from EIGRP 200 into OSPF.
What I would like to achieve the following
-> When BB2 try to trace route the loop back of R8 loop back ip address
(8.8.8.8) It should follow the below path
BB2-> R14-> R12 -> R11 -> R7 -> R6 -> R8
-> When BB1 try to trace route the loop back of R8 loop back ip address
(8.8.8.8) It should follow the below path
BB1->R1->R2 -> R3 -> R5 -> R6 -> R8
-> When any BB1 or BB2 try to trace route the loopback of R10 it should
follow the below path
R5->R6->R7->R9->R10
Your suggestions or input will be highly appreciated.
Regards,
Waqas Daar
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
