Did you enable MPLS globally with the MPLS ip in global config mode? Respectfully,
Ryan Krcelic CCIE #38087 Sent from my iPhone On Jun 19, 2013, at 7:30 PM, isaac mukhwana <[email protected]> wrote: > WITH ROUTER 2 AND ROUTER 3 DIRECTLY CONNECTED ON THEIR FA0/0 PHYSICAL > INTERFACES, I CANNOT GET THEM TO FORM LDP NEIGHBORS, SHOW MPLS LDP > NEIGHBOR COMMAND LISTS NO NEIGHBOR. > AM I MISSING SOMETHING HERE?? > ROUTER 2 > > mpls label range 200 299 > mpls label protocol ldp > > > interface FastEthernet0/0 > ip address 192.1.23.2 255.255.255.0 > duplex auto > speed auto > mpls label protocol ldp > mpls ip > ! > > interface FastEthernet0/1 > ip address 192.1.12.2 255.255.255.0 > duplex auto > speed auto > mpls label protocol ldp > mpls ip > > ROUTER 3 > > mpls label range 300 399 > mpls label protocol ldp > ! > interface FastEthernet0/0 > ip address 192.1.23.3 255.255.255.0 > duplex auto > speed auto > mpls label protocol ldp > mpls ip > ! > > interface FastEthernet0/1 > ip address 192.1.34.3 255.255.255.0 > duplex auto > speed auto > mpls label protocol ldp > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
