I am not up on specific tasks in the labs but I will say that I tried the GNS3 route and its got many flaws, most particularly the ESW- 16.
My own advice would be to gloss over the layer 2 stuff until you can get hold of a physical rack. Speaking of, I'm up to my eyeballs in 3550 switches but have no 3560. If anyone would like to make a deal for one drop me a line. Sent from themy iPhone On May 28, 2013, at 3:00 AM, [email protected] wrote: > Send CCIE_RS mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://onlinestudylist.com/mailman/listinfo/ccie_rs > or, via email, send a message with subject or body 'help' to > [email protected] > > You can reach the person managing the list at > [email protected] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CCIE_RS digest..." > > > Today's Topics: > > 1. STP issues (freda williams) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 28 May 2013 09:00:19 +0100 > From: freda williams <[email protected]> > To: CCIE_RS OnlineStudyList <[email protected]> > Subject: [OSL | CCIE_RS] STP issues > Message-ID: > <cajvfe_wb5efiodewkjj3ek4bvjeq8q+blxu8dgypaqr5avk...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > Good day All, > > Am a just starting my journey towards my CCIE. Am a bloody newbie, I will > appreciate your help with the following issues. > > Am of the mind that I have skipped a process/overlooking a requirement. > > Am runing GNS and have checke that the features run on the NM-16ESW > platform that I have but am still not able to do the tasks required in the > IPEXPERT Vol 1 Lab 1. > > Issue 1: > The hosts namely R1 to BB1 (VLAN 100 switches 1 & 2) and R5 to R6 & R7 > (VLAN 567 switches 1 & 2( Vlan 2567 switches 3 & 4) are not reachable > (I cannot ping or traceroute to them). The Vlans are connected across > switches. > > Issue 2: > After the creation of SVI's on Cats 1,2,3 & 4 they (SVI's)are up but not > reachable from any point in the various subnets. > > I have attached the configurations of the affected systems below. > > Thanks in anticipation of your kind assistance. > > William Alfreds > > > > > ................................ > > > Cat1 > > Connected to Dynamips VM "Cat1" (ID 13, type c3725) - Console port > Press ENTER to get the prompt. > > Cat1(config-if)#do sh run > Building configuration... > > Current configuration : 4392 bytes > ! > version 12.4 > service timestamps debug datetime msec > service timestamps log datetime msec > service password-encryption > ! > hostname Cat1 > ! > boot-start-marker > boot-end-marker > ! > ! > no aaa new-model > memory-size iomem 5 > ip cef > ! > ! > ! > ! > no ip domain lookup > ! > multilink bundle-name authenticated > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > archive > log config > hidekeys > ! > ! > ! > ! > ! > ! > ! > ! > interface Port-channel2 > switchport mode trunk > ! > interface Port-channel3 > switchport mode trunk > ! > interface Port-channel4 > switchport mode trunk > ! > interface FastEthernet0/0 > no ip address > shutdown > duplex auto > speed auto > ! > interface FastEthernet0/1 > no ip address > shutdown > duplex auto > speed auto > ! > interface FastEthernet1/0 > switchport access vlan 12 > duplex full > speed 100 > ! > interface FastEthernet1/1 > switchport access vlan 12 > duplex full > speed 100 > ! > interface FastEthernet1/2 > switchport access vlan 12 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/3 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/4 > switchport access vlan 40 > duplex full > speed 100 > ! > interface FastEthernet1/5 > switchport access vlan 567 > duplex full > speed 100 > ! > interface FastEthernet1/6 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/7 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/8 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/9 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/10 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/11 > switchport access vlan 100 > duplex full > speed 100 > ! > interface FastEthernet1/12 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/13 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/14 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/15 > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/0 > switchport mode trunk > duplex full > speed 100 > channel-group 2 mode on > ! > interface FastEthernet2/1 > switchport mode trunk > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/2 > switchport mode trunk > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/3 > switchport mode trunk > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/4 > switchport mode trunk > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/5 > switchport mode trunk > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/6 > switchport mode trunk > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/7 > switchport mode trunk > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/8 > switchport mode trunk > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/9 > switchport mode trunk > duplex full > speed 100 > channel-group 4 mode on > ! > interface FastEthernet2/10 > switchport mode trunk > duplex full > speed 100 > channel-group 4 mode on > ! > interface FastEthernet2/11 > switchport mode trunk > duplex full > speed 100 > channel-group 3 mode on > ! > interface FastEthernet2/12 > switchport mode trunk > duplex full > speed 100 > channel-group 3 mode on > ! > interface FastEthernet2/13 > switchport mode trunk > duplex full > speed 100 > channel-group 2 mode on > ! > interface FastEthernet2/14 > switchport mode trunk > duplex full > speed 100 > channel-group 2 mode on > ! > interface FastEthernet2/15 > switchport mode trunk > shutdown > duplex full > speed 100 > ! > interface Vlan1 > no ip address > ! > interface Vlan12 > ip address 150.100.12.11 255.255.255.0 > ! > interface Vlan40 > ip address 150.100.40.11 255.255.255.0 > ! > interface Vlan100 > ip address 100.100.100.11 255.255.255.0 > ! > interface Vlan200 > ip address 100.100.200.11 255.255.255.0 > ! > interface Vlan300 > ip address 100.100.250.11 255.255.255.0 > ! > interface Vlan567 > ip address 150.100.220.11 255.255.255.240 > ! > ip forward-protocol nd > ! > ! > no ip http server > no ip http secure-server > ! > ! > ! > ! > ! > ! > ! > control-plane > ! > ! > ! > ! > ! > ! > ! > ! > ! > banner motd ^C UNAUTHORISED ACCESS IS STRICTLY FORBIDDEN ^C > alias exec myip sh ip int br | exc unass > alias exec siib sh ip int br > alias exec sir sh ip route > alias exec fm sh frame map > alias exec fp sh frame pvc > alias exec cdp sh cdp nei > alias exec sit sh int tr > alias exec sip sh ip protocol > alias exec vtp sh vtp stat > alias exec vls sh vlan-sw > ! > line con 0 > exec-timeout 0 0 > privilege level 15 > password 7 060F1F24545E0C0B11 > logging synchronous > login > history size 30 > line aux 0 > line vty 0 4 > exec-timeout 0 0 > privilege level 15 > password 7 020F145E13160A3358 > logging synchronous > login > history size 30 > ! > ! > end > > Cat1(config-if)# > > ................................ > > > Cat2 > > > Connected to Dynamips VM "Cat2" (ID 14, type c3725) - Console port > Press ENTER to get the prompt. > > Cat2#do sh run > ^ > % Invalid input detected at '^' marker. > > Cat2#sh run > Building configuration... > > Current configuration : 4473 bytes > ! > version 12.4 > service timestamps debug datetime msec > service timestamps log datetime msec > service password-encryption > ! > hostname Cat2 > ! > boot-start-marker > boot-end-marker > ! > ! > no aaa new-model > memory-size iomem 5 > ip cef > ! > ! > ! > ! > no ip domain lookup > ! > multilink bundle-name authenticated > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > archive > log config > hidekeys > ! > ! > ! > ! > ! > ! > ! > ! > interface Port-channel1 > switchport mode trunk > ! > interface Port-channel4 > switchport mode trunk > ! > interface Port-channel3 > switchport mode trunk > ! > interface FastEthernet0/0 > no ip address > shutdown > duplex auto > speed auto > ! > interface FastEthernet0/1 > no ip address > shutdown > duplex auto > speed auto > ! > interface FastEthernet1/0 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/1 > switchport access vlan 100 > duplex full > speed 100 > ! > interface FastEthernet1/2 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/3 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/4 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/5 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/6 > switchport access vlan 567 > duplex full > speed 100 > ! > interface FastEthernet1/7 > switchport access vlan 567 > duplex full > speed 100 > ! > interface FastEthernet1/8 > switchport access vlan 200 > duplex full > speed 100 > ! > interface FastEthernet1/9 > switchport access vlan 300 > duplex full > speed 100 > ! > interface FastEthernet1/10 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/11 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/12 > switchport access vlan 200 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/13 > switchport access vlan 300 > duplex full > speed 100 > ! > interface FastEthernet1/14 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/15 > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/0 > switchport mode trunk > duplex full > speed 100 > channel-group 1 mode on > ! > interface FastEthernet2/1 > switchport mode trunk > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/2 > switchport mode trunk > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/3 > switchport mode trunk > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/4 > switchport mode trunk > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/5 > switchport mode trunk > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/6 > switchport mode trunk > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/7 > switchport mode trunk > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/8 > switchport mode trunk > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/9 > switchport mode trunk > duplex full > speed 100 > channel-group 3 mode on > ! > interface FastEthernet2/10 > switchport mode trunk > duplex full > speed 100 > channel-group 3 mode on > ! > interface FastEthernet2/11 > switchport mode trunk > duplex full > speed 100 > channel-group 4 mode on > ! > interface FastEthernet2/12 > switchport mode trunk > duplex full > speed 100 > channel-group 4 mode on > ! > interface FastEthernet2/13 > switchport mode trunk > duplex full > speed 100 > channel-group 1 mode on > ! > interface FastEthernet2/14 > switchport mode trunk > duplex full > speed 100 > channel-group 1 mode on > ! > interface FastEthernet2/15 > switchport mode trunk > shutdown > duplex full > speed 100 > ! > interface Vlan1 > no ip address > ! > interface Vlan12 > ip address 150.100.12.12 255.255.255.0 > ! > interface Vlan40 > ip address 150.100.40.12 255.255.255.0 > ! > interface Vlan100 > ip address 100.100.100.12 255.255.255.0 > ! > interface Vlan200 > ip address 100.100.200.12 255.255.255.0 > ! > interface Vlan300 > ip address 100.100.250.12 255.255.255.0 > ! > interface Vlan567 > ip address 150.100.220.12 255.255.255.240 > ! > ip forward-protocol nd > ! > ! > no ip http server > no ip http secure-server > ! > ! > ! > ! > ! > ! > ! > control-plane > ! > ! > ! > ! > ! > ! > ! > ! > ! > banner motd ^C UNAUTHORISED ACCESS IS STRICTLY FORBIDDEN ^C > alias exec myip sh ip int br | exc unass > alias exec siib sh ip int br > alias exec sir sh ip route > alias exec fm sh frame map > alias exec fp sh frame pvc > alias exec cdp sh cdp nei > alias exec sit sh int tr > alias exec sip sh ip protocol > alias exec vtp sh vtp stat > alias exec vls sh vlan-sw > ! > line con 0 > exec-timeout 0 0 > privilege level 15 > password 7 000D03031C4B0E141B > logging synchronous > login > history size 30 > line aux 0 > exec-timeout 0 0 > privilege level 15 > logging synchronous > line vty 0 4 > exec-timeout 0 0 > privilege level 15 > password 7 011A1601431B031D35 > logging synchronous > login > history size 30 > ! > ! > end > > Cat2# > .................................. > > Cat3 > > Connected to Dynamips VM "Cat3" (ID 6, type c3725) - Console port > Press ENTER to get the prompt. > > Cat3(config-if)#do sh run > Building configuration... > > Current configuration : 4001 bytes > ! > version 12.4 > service timestamps debug datetime msec > service timestamps log datetime msec > service password-encryption > ! > hostname Cat3 > ! > boot-start-marker > boot-end-marker > ! > ! > no aaa new-model > memory-size iomem 5 > ip cef > ! > ! > ! > ! > no ip domain lookup > ! > multilink bundle-name authenticated > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > vtp domain ipexpert > vtp mode transparent > archive > log config > hidekeys > ! > ! > ! > ! > vlan 12 > name VLANB > ! > vlan 40 > name VLANC > ! > vlan 100 > name VLANA > ! > vlan 200 > name VLANE > ! > vlan 240 > ! > vlan 300 > name VLANF > ! > vlan 567 > name VLAND > ! > vlan 2200,2300,2567 > ! > ! > ! > ! > ! > interface Port-channel4 > switchport mode trunk > ! > interface Port-channel1 > switchport mode trunk > ! > interface Port-channel2 > switchport mode trunk > ! > interface FastEthernet0/0 > no ip address > shutdown > duplex auto > speed auto > ! > interface FastEthernet0/1 > no ip address > shutdown > duplex auto > speed auto > ! > interface FastEthernet1/0 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/1 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/2 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/3 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/4 > switchport access vlan 240 > duplex full > speed 100 > ! > interface FastEthernet1/5 > switchport access vlan 2567 > duplex full > speed 100 > ! > interface FastEthernet1/6 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/7 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/8 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/9 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/10 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/11 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/12 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/13 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/14 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/15 > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/0 > ! > interface FastEthernet2/1 > ! > interface FastEthernet2/2 > ! > interface FastEthernet2/3 > ! > interface FastEthernet2/4 > ! > interface FastEthernet2/5 > ! > interface FastEthernet2/6 > ! > interface FastEthernet2/7 > ! > interface FastEthernet2/8 > ! > interface FastEthernet2/9 > switchport mode trunk > duplex full > speed 100 > channel-group 2 mode on > ! > interface FastEthernet2/10 > switchport mode trunk > duplex full > speed 100 > channel-group 2 mode on > ! > interface FastEthernet2/11 > switchport mode trunk > duplex full > speed 100 > channel-group 1 mode on > ! > interface FastEthernet2/12 > switchport mode trunk > duplex full > speed 100 > channel-group 1 mode on > ! > interface FastEthernet2/13 > switchport mode trunk > duplex full > speed 100 > channel-group 4 mode on > ! > interface FastEthernet2/14 > switchport mode trunk > duplex full > speed 100 > channel-group 4 mode on > ! > interface FastEthernet2/15 > ! > interface Vlan1 > no ip address > ! > interface Vlan12 > ip address 150.100.12.13 255.255.255.0 > ! > interface Vlan40 > ip address 150.100.40.13 255.255.255.0 > ! > interface Vlan100 > ip address 100.100.100.13 255.255.255.0 > ! > interface Vlan200 > ip address 100.100.200.13 255.255.255.0 > ! > interface Vlan300 > ip address 100.100.250.13 255.255.255.0 > ! > interface Vlan567 > ip address 150.100.220.13 255.255.255.240 > ! > ip forward-protocol nd > ! > ! > no ip http server > no ip http secure-server > ! > ! > ! > ! > ! > ! > ! > control-plane > ! > ! > ! > ! > ! > ! > ! > ! > ! > banner motd ^C UNAUTHORISED ACCESS IS STRICTLY FORBIDDEN ^C > alias exec myip sh ip int br | exc unass > alias exec siib sh ip int br > alias exec sir sh ip route > alias exec fm sh frame map > alias exec fp sh frame pvc > alias exec cdp sh cdp nei > alias exec sit sh int tr > alias exec sip sh ip protocol > alias exec vtp sh vtp stat > alias exec vls sh vlan-sw > ! > line con 0 > exec-timeout 0 0 > privilege level 15 > password 7 011A1601431B031D35 > logging synchronous > login > history size 30 > line aux 0 > exec-timeout 0 0 > privilege level 15 > logging synchronous > line vty 0 4 > exec-timeout 0 0 > privilege level 15 > password 7 060F1F24545E0C0B11 > logging synchronous > login > history size 30 > ! > ! > end > > Cat3(config-if)# > > .................................... > > Cat4 > > Connected to Dynamips VM "Cat4" (ID 7, type c3725) - Console port > Press ENTER to get the prompt. > > Cat4(config-if)# > Cat4(config-if)# > Cat4(config-if)#do sh run > Building configuration... > > Current configuration : 4040 bytes > ! > version 12.4 > service timestamps debug datetime msec > service timestamps log datetime msec > service password-encryption > ! > hostname Cat4 > ! > boot-start-marker > boot-end-marker > ! > ! > no aaa new-model > memory-size iomem 5 > ip cef > ! > ! > ! > ! > no ip domain lookup > ! > multilink bundle-name authenticated > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > vtp domain ipexpert > vtp mode transparent > archive > log config > hidekeys > ! > ! > ! > ! > vlan 12 > name VLANB > ! > vlan 40 > name VLANC > ! > vlan 100 > name VLANA > ! > vlan 200 > name VLANE > ! > vlan 240 > ! > vlan 300 > name VLANF > ! > vlan 567 > name VLAND > ! > vlan 2200,2300,2567 > ! > ! > ! > ! > ! > interface Port-channel3 > switchport mode trunk > ! > interface Port-channel2 > switchport mode trunk > ! > interface Port-channel1 > switchport mode trunk > ! > interface FastEthernet0/0 > no ip address > shutdown > duplex auto > speed auto > ! > interface FastEthernet0/1 > no ip address > shutdown > duplex auto > speed auto > ! > interface FastEthernet1/0 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/1 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/2 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/3 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/4 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/5 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/6 > switchport access vlan 2567 > duplex full > speed 100 > ! > interface FastEthernet1/7 > switchport access vlan 2567 > duplex full > speed 100 > ! > interface FastEthernet1/8 > switchport access vlan 2200 > duplex full > speed 100 > ! > interface FastEthernet1/9 > switchport access vlan 2300 > duplex full > speed 100 > ! > interface FastEthernet1/10 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/11 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/12 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/13 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/14 > shutdown > duplex full > speed 100 > ! > interface FastEthernet1/15 > shutdown > duplex full > speed 100 > ! > interface FastEthernet2/0 > ! > interface FastEthernet2/1 > ! > interface FastEthernet2/2 > ! > interface FastEthernet2/3 > ! > interface FastEthernet2/4 > ! > interface FastEthernet2/5 > ! > interface FastEthernet2/6 > ! > interface FastEthernet2/7 > ! > interface FastEthernet2/8 > ! > interface FastEthernet2/9 > switchport mode trunk > duplex full > speed 100 > channel-group 1 mode on > ! > interface FastEthernet2/10 > switchport mode trunk > duplex full > speed 100 > channel-group 1 mode on > ! > interface FastEthernet2/11 > switchport mode trunk > duplex full > speed 100 > channel-group 2 mode on > ! > interface FastEthernet2/12 > switchport mode trunk > duplex full > speed 100 > channel-group 2 mode on > ! > interface FastEthernet2/13 > switchport mode trunk > duplex full > speed 100 > channel-group 3 mode on > ! > interface FastEthernet2/14 > switchport mode trunk > duplex full > speed 100 > channel-group 3 mode on > ! > interface FastEthernet2/15 > ! > interface Vlan1 > no ip address > ! > interface Vlan12 > ip address 150.100.12.14 255.255.255.0 > ! > interface Vlan40 > ip address 150.100.40.14 255.255.255.0 > ! > interface Vlan100 > ip address 100.100.100.14 255.255.255.0 > ! > interface Vlan200 > ip address 100.100.200.14 255.255.255.0 > ! > interface Vlan300 > ip address 100.100.250.14 255.255.255.0 > ! > interface Vlan567 > ip address 150.100.220.14 255.255.255.240 > ! > ip forward-protocol nd > ! > ! > no ip http server > no ip http secure-server > ! > ! > ! > ! > ! > ! > ! > control-plane > ! > ! > ! > ! > ! > ! > ! > ! > ! > banner motd ^C UNAUTHORISED ACCESS IS STRICTLY FORBIDDEN ^C > alias exec myip sh ip int br | exc unass > alias exec siib sh ip int br > alias exec sir sh ip route > alias exec fm sh frame map > alias exec fp sh frame pvc > alias exec cdp sh cdp nei > alias exec sit sh int tr > alias exec sip sh ip protocol > alias exec vtp sh vtp stat > alias exec vls sh vlan-sw > ! > line con 0 > exec-timeout 0 0 > privilege level 15 > password 7 09455E0C011512001F > logging synchronous > login > history size 30 > line aux 0 > exec-timeout 0 0 > privilege level 15 > logging synchronous > line vty 0 4 > exec-timeout 0 0 > privilege level 15 > password 7 08285C4B1109000506 > logging synchronous > login > history size 30 > ! > ! > end > > Cat4(config-if)# > > > ................................... > > BB1 > > Connected to Dynamips VM "BB1" (ID 10, type c2600) - Console port > Press ENTER to get the prompt. > > BB1(config-if)#do sh run > Building configuration... > > Current configuration : 998 bytes > ! > version 12.4 > service timestamps debug datetime msec > service timestamps log datetime msec > no service password-encryption > ! > hostname BB1 > ! > boot-start-marker > boot-end-marker > ! > ! > no aaa new-model > memory-size iomem 15 > ip cef > ! > ! > ! > ! > no ip domain lookup > ! > ! > ! > ! > ! > ! > ! > interface Ethernet0/0 > bandwidth 100000 > ip address 100.100.100.100 255.255.255.0 > full-duplex > ! > ip forward-protocol nd > ! > ip http server > no ip http secure-server > ! > ! > control-plane > ! > banner motd ^C UNAUTHORISED ACCESS IS STRICTLY FORBIDDEN ^C > alias exec myip sh ip int br | exc unass > alias exec siib sh ip int br > alias exec sir sh ip route > alias exec fm sh frame map > alias exec fp sh frame pvc > alias exec cdp sh cdp nei > alias exec sit sh int tr > alias exec sip sh ip protocol > alias exec vtp sh vtp stat > alias exec vls sh vlan-sw > ! > line con 0 > exec-timeout 0 0 > privilege level 15 > password ipexpert > login > history size 30 > line aux 0 > line vty 0 4 > exec-timeout 0 0 > privilege level 15 > password ipexpert > login > history size 30 > ! > ! > end > > BB1(config-if)# > > > ..................................... > > R1 > > Connected to Dynamips VM "R1" (ID 4, type c3725) - Console port > Press ENTER to get the prompt. > > R1(config-if)#do sh run > Building configuration... > > Current configuration : 1471 bytes > ! > version 12.4 > service timestamps debug datetime msec > service timestamps log datetime msec > service password-encryption > ! > hostname R1 > ! > boot-start-marker > boot-end-marker > ! > ! > no aaa new-model > memory-size iomem 5 > ip cef > ! > ! > ! > ! > no ip domain lookup > ! > multilink bundle-name authenticated > ! > ! > vtp interface lo0 only > vtp domain server > vtp mode transparent > archive > log config > hidekeys > ! > ! > ! > > interface Loopback0 > ip address 200.0.0.1 255.255.255.255 > ! > interface FastEthernet0/0 > ip address 150.100.12.1 255.255.255.0 > speed 100 > full-duplex > ! > interface FastEthernet0/1 > ip address 100.100.100.1 255.255.255.0 > speed 100 > full-duplex > ! > ip forward-protocol nd > ! > ! > no ip http server > no ip http secure-server > ! > ! > control-plane > ! > ! > banner motd ^C UNAUTHORISED ACCESS IS STRICTLY FORBIDDEN ^C > alias exec myip sh ip int br | exc unass > alias exec siib sh ip int br > alias exec sir sh ip route > alias exec fm sh frame map > alias exec fp sh frame pvc > alias exec cdp sh cdp nei > alias exec sit sh int tr > alias exec sip sh ip protocol > alias exec vtp sh vtp stat > alias exec vls sh vlan-sw > ! > line con 0 > exec-timeout 0 0 > privilege level 15 > password 7 1047191C1D07171918 > logging synchronous > login > history size 30 > line aux 0 > exec-timeout 0 0 > privilege level 15 > logging synchronous > line vty 0 4 > exec-timeout 0 0 > privilege level 15 > password 7 060F1F24545E0C0B11 > logging synchronous > login > history size 30 > ! > ! > end > > R1(config-if)# > > > > .................................... > > > R5 > > > Connected to Dynamips VM "R5" (ID 1, type c3725) - Console port > Press ENTER to get the prompt. > > R5(config-if)#do sh run > Building configuration... > > Current configuration : 1914 bytes > ! > version 12.4 > service timestamps debug datetime msec > service timestamps log datetime msec > service password-encryption > ! > hostname R5 > ! > boot-start-marker > boot-end-marker > ! > ! > no aaa new-model > memory-size iomem 5 > ip cef > ! > ! > ! > ! > no ip domain lookup > ! > multilink bundle-name authenticated > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > archive > log config > hidekeys > ! > ! > ! > ! > ! > ! > ! > ! > interface Loopback0 > ip address 200.0.0.5 255.255.255.255 > ! > interface FastEthernet0/0 > ip address 150.100.220.5 255.255.255.240 > speed 100 > full-duplex > ! > interface Serial0/0 > no ip address > shutdown > clock rate 2000000 > ! > interface FastEthernet0/1 > ip address 150.100.221.5 255.255.255.0 > speed 100 > full-duplex > ! > interface Serial0/1 > ip address 150.100.100.5 255.255.255.0 > encapsulation frame-relay > clock rate 64000 > no arp frame-relay > frame-relay map ip 150.100.100.6 506 broadcast > frame-relay map ip 150.100.100.2 502 broadcast > frame-relay map ip 150.100.100.5 502 > no frame-relay inverse-arp > ! > interface Serial0/2 > ip address 150.100.25.5 255.255.255.0 > clock rate 64000 > ! > interface Serial0/3 > no ip address > shutdown > clock rate 2000000 > ! > ip forward-protocol nd > ! > ! > no ip http server > no ip http secure-server > ! > ! > ! > ! > ! > ! > ! > control-plane > ! > ! > ! > ! > ! > ! > ! > ! > ! > banner motd ^C UNAUTHORISED ACCESS IS STRICTLY FORBIDDEN ^C > alias exec myip sh ip int br | exc unass > alias exec siib sh ip int br > alias exec sir sh ip route > alias exec fm sh frame map > alias exec fp sh frame pvc > alias exec cdp sh cdp nei > alias exec sit sh int tr > alias exec sip sh ip protocol > alias exec vtp sh vtp stat > alias exec vls sh vlan-sw > ! > line con 0 > exec-timeout 0 0 > privilege level 15 > password 7 151B1B091C3A2E363C > logging synchronous > login > history size 30 > line aux 0 > exec-timeout 0 0 > privilege level 15 > logging synchronous > line vty 0 4 > exec-timeout 0 0 > privilege level 15 > password 7 011A1601431B031D35 > logging synchronous > login > history size 30 > ! > ! > end > > R5(config-if)# > > > ....................................... > > > R6 > > > Connected to Dynamips VM "R6" (ID 2, type c3725) - Console port > Press ENTER to get the prompt. > > R6(config-if)#do sh run > Building configuration... > > Current configuration : 2214 bytes > ! > version 12.4 > service timestamps debug datetime msec > service timestamps log datetime msec > service password-encryption > ! > hostname R6 > ! > boot-start-marker > boot-end-marker > ! > ! > no aaa new-model > memory-size iomem 5 > ip cef > ! > ! > ! > ! > no ip domain lookup > ! > multilink bundle-name authenticated > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > archive > log config > hidekeys > ! > ! > ! > ! > ! > ! > ! > ! > interface Loopback0 > ip address 200.0.0.6 255.255.255.255 > ! > interface MFR1 > ip address 150.100.69.6 255.255.255.0 > shutdown > frame-relay interface-dlci 609 > ! > interface FastEthernet0/0 > ip address 150.100.220.6 255.255.255.240 > speed 100 > full-duplex > ! > interface Serial0/0 > no ip address > shutdown > clock rate 2000000 > ! > interface FastEthernet0/1 > ip address 150.100.221.6 255.255.255.0 > speed 100 > full-duplex > ! > interface Serial0/1 > ip address 150.100.100.6 255.255.255.0 > encapsulation frame-relay > clock rate 64000 > no arp frame-relay > frame-relay map ip 150.100.100.5 605 broadcast > frame-relay map ip 150.100.100.2 602 broadcast > frame-relay map ip 150.100.100.6 602 > no frame-relay inverse-arp > ! > interface Serial2/0 > ip address 150.100.69.6 255.255.255.0 > serial restart-delay 0 > clock rate 64000 > ! > interface Serial2/1 > ip address 150.100.96.6 255.255.255.0 > serial restart-delay 0 > clock rate 64000 > ! > interface Serial2/2 > no ip address > shutdown > serial restart-delay 0 > ! > interface Serial2/3 > no ip address > shutdown > serial restart-delay 0 > ! > ip forward-protocol nd > ! > ! > no ip http server > no ip http secure-server > ! > ! > ! > ! > ! > ! > ! > control-plane > ! > ! > ! > ! > ! > ! > ! > ! > ! > banner motd ^C UNAUTHORISED ACCESS IS STRICTLY FORBIDDEN ^C > alias exec myip sh ip int br | exc unass > alias exec siib sh ip int br > alias exec sir sh ip route > alias exec fm sh frame map > alias exec fp sh frame pvc > alias exec cdp sh cdp nei > alias exec sit sh int tr > alias exec sip sh ip protocol > alias exec vtp sh vtp stat > alias exec vls sh vlan-sw > ! > line con 0 > exec-timeout 0 0 > privilege level 15 > password 7 0502160A395C4B1B0D > logging synchronous > login > history size 30 > line aux 0 > exec-timeout 0 0 > privilege level 15 > logging synchronous > line vty 0 4 > exec-timeout 0 0 > privilege level 15 > password 7 011A1601431B031D35 > logging synchronous > login > history size 30 > ! > ! > end > > R6(config-if)# > > > > > ................................. > > > R7 > > Connected to Dynamips VM "R7" (ID 3, type c3725) - Console port > Press ENTER to get the prompt. > > R7(config-if)# > R7(config-if)# > R7(config-if)#do sh run > Building configuration... > > Current configuration : 1888 bytes > ! > version 12.4 > service timestamps debug datetime msec > service timestamps log datetime msec > service password-encryption > ! > hostname R7 > ! > boot-start-marker > boot-end-marker > ! > ! > no aaa new-model > memory-size iomem 5 > ip cef > ! > ! > ! > ! > no ip domain lookup > ! > multilink bundle-name authenticated > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > archive > --More-- > *Mar 1 00:33:47.727: %LINEPROTO-5-UPDOWN: Line protocol on Interface > Serial0/0, changed state to down > log config > hidekeys > ! > ! > ! > ! > ! > ! > ! > ! > interface Loopback0 > ip address 200.0.0.7 255.255.255.255 > ! > interface MFR1 > ip address 150.100.69.6 255.255.255.0 > shutdown > frame-relay interface-dlci 609 > ! > interface FastEthernet0/0 > ip address 150.100.220.7 255.255.255.240 > speed 100 > full-duplex > ! > interface Serial0/0 > ip address 150.100.78.7 255.255.255.0 > clock rate 64000 > ! > interface FastEthernet0/1 > ip address 150.100.221.7 255.255.255.0 > speed 100 > full-duplex > ! > interface Serial0/1 > ip address 150.100.100.6 255.255.255.0 > encapsulation frame-relay > shutdown > clock rate 64000 > no arp frame-relay > frame-relay map ip 150.100.100.6 602 > frame-relay map ip 150.100.100.2 602 broadcast > frame-relay map ip 150.100.100.5 605 broadcast > no frame-relay inverse-arp > ! > ip forward-protocol nd > ! > ! > no ip http server > no ip http secure-server > ! > ! > ! > ! > ! > ! > ! > control-plane > ! > ! > ! > ! > ! > ! > ! > ! > ! > banner motd ^CC UNAUTHORISED ACCESS IS STRICTLY FORBIDDEN ^C > alias exec myip sh ip int br | exc unass > alias exec siib sh ip int br > alias exec sir sh ip route > alias exec fm sh frame map > alias exec fp sh frame pvc > alias exec cdp sh cdp nei > alias exec sit sh int tr > alias exec sip sh ip protocol > alias exec vtp sh vtp stat > alias exec vls sh vlan-sw > ! > line con 0 > exec-timeout 0 0 > privilege level 15 > password 7 0706314956191C1703 > logging synchronous > login > history size 30 > line aux 0 > exec-timeout 0 0 > privilege level 15 > logging synchronous > line vty 0 4 > exec-timeout 0 0 > privilege level 15 > password 7 130C0717131C01383F > logging synchronous > login > history size 30 > ! > ! > end > > R7(config-if)# > > ...................................... > > > End of CCIE_RS Digest, Vol 88, Issue 24 > *************************************** _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
