On *R6* what is the output of *show ip route* and *sh run | s bgp* * * Let's see the distance you have for ibgp on R6.
On 29 May 2012 11:11, khaled al-ajeman <[email protected]> wrote: > Hi fellas, > > My problem is that, I have my ospf neighbourship is up and running between > R5, R6 AND R7 but the problem is I can not see my ospf routing table it is > totally empty, any thoughts? > below are my configuration: > > > ospf neighourship for R5, R6 AND R7 > > R5#sh ip os nei > Neighbor ID Pri State Dead Time Address Interface > 200.0.3.6 0 FULL/DROTHER 00:00:34 150.100.221.6 > FastEthernet0/1 > 200.0.3.7 0 FULL/DROTHER 00:00:32 150.100.221.7 > FastEthernet0/1 > 200.0.3.6 0 FULL/DROTHER 00:00:34 150.100.220.6 > FastEthernet0/0 > 200.0.3.7 0 FULL/DROTHER 00:00:32 150.100.220.7 > FastEthernet0/0 > R5# > > > R5 > hostname R5 > router ospf 2 > router-id 5.5.5.5 > log-adjacency-changes > redistribute bgp 256 subnets route-map bgp2ospf > passive-interface default > no passive-interface FastEthernet0/0 > no passive-interface FastEthernet0/1 > network 150.100.220.0 0.0.1.255 area 567 > R5 output > > R5#sir os > O E1 209.202.63.0/24 [110/11] via 150.100.221.6, 00:10:34, FastEthernet0/1 > [110/11] via 150.100.220.6, 00:10:34, FastEthernet0/0 > O E1 192.168.12.0/24 [110/11] via 150.100.221.6, 00:11:06, FastEthernet0/1 > [110/11] via 150.100.220.6, 00:11:06, FastEthernet0/0 > O E1 192.168.13.0/24 [110/11] via 150.100.221.6, 00:11:06, FastEthernet0/1 > [110/11] via 150.100.220.6, 00:11:06, FastEthernet0/0 > O E1 207.134.253.0/24 [110/11] via 150.100.221.6, 00:10:34, > FastEthernet0/1 > [110/11] via 150.100.220.6, 00:10:34, FastEthernet0/0 > O E1 192.1.13.0/24 [110/11] via 150.100.221.6, 00:10:34, FastEthernet0/1 > [110/11] via 150.100.220.6, 00:10:34, FastEthernet0/0 > O E1 207.102.171.0/24 [110/11] via 150.100.221.6, 00:10:34, > FastEthernet0/1 > [110/11] via 150.100.220.6, 00:10:34, FastEthernet0/0 > 100.0.0.0/24 is subnetted, 3 subnets > O E1 100.100.100.0 [110/11] via 150.100.221.6, 00:10:34, FastEthernet0/1 > [110/11] via 150.100.220.6, 00:10:36, FastEthernet0/0 > O E1 100.100.200.0 [110/11] via 150.100.221.6, 00:10:36, FastEthernet0/1 > [110/11] via 150.100.220.6, 00:10:36, FastEthernet0/0 > O E1 100.100.250.0 [110/11] via 150.100.221.6, 00:11:08, FastEthernet0/1 > [110/11] via 150.100.220.6, 00:11:08, FastEthernet0/0 > O E1 192.168.14.0/24 [110/11] via 150.100.221.6, 00:11:08, FastEthernet0/1 > > R6 > router ospf 2 > log-adjacency-changes > redistribute bgp 256 subnets route-map bgp2ospf > passive-interface default > no passive-interface FastEthernet0/0 > no passive-interface FastEthernet0/1 > no passive-interface Serial1/0 > network 150.100.220.0 0.0.1.255 area 567 > > R6 - output > > R6#sir os > R6# > R6# > R6# > > R7 > > router ospf 2 > log-adjacency-changes > passive-interface default > no passive-interface FastEthernet0/0 > no passive-interface FastEthernet0/1 > network 150.100.220.0 0.0.1.255 area 567 > permit ospf host 150.100.220.5 any > > R7 --- output > > R7#sir os > O E1 209.202.63.0/24 [110/11] via 150.100.221.6, 00:13:00, FastEthernet0/1 > [110/11] via 150.100.220.6, 00:13:00, FastEthernet0/0 > O E1 192.168.12.0/24 [110/11] via 150.100.221.6, 00:13:32, FastEthernet0/1 > [110/11] via 150.100.220.6, 00:13:32, FastEthernet0/0 > O E1 192.168.13.0/24 [110/11] via 150.100.221.6, 00:13:32, FastEthernet0/1 > [110/11] via 150.100.220.6, 00:13:32, FastEthernet0/0 > O E1 207.134.253.0/24 [110/11] via 150.100.221.6, 00:13:00, > FastEthernet0/1 > [110/11] via 150.100.220.6, 00:13:00, FastEthernet0/0 > O E1 192.1.13.0/24 [110/11] via 150.100.221.6, 00:13:00, FastEthernet0/1 > [110/11] via 150.100.220.6, 00:13:00, FastEthernet0/0 > O E1 207.102.171.0/24 [110/11] via 150.100.221.6, 00:13:00, > FastEthernet0/1 > [110/11] via 150.100.220.6, 00:13:00, FastEthernet0/0 > 100.0.0.0/24 is subnetted, 3 subnets > thanks, > > khaled > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > -- Olugbenga Oyebande MD, DAIT 234-803-302-5287 http://www.dait-ng.com Cisco Networks, Network Security & Quality of Service DAIT Linux Enterprise Network Servers, Web Portal Projects Broadband Internet Deployment & ISP Consultancy [image: View my profile on LinkedIn]View Olugbenga Oyebande's profile<http://ng.linkedin.com/pub/olugbenga-oyebande/15/395/8a9> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
