FYI, The error mentioned below is still in the latest vol1 DSG.
-max -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Morgan Charpentier Sent: Friday, December 17, 2010 1:49 AM To: [email protected] Subject: [OSL | CCIE_RS] RP Election Error on Task 24.16 V1 Hello Experts, It seems that solution guide has a little mistake on the 24.16 Volume 1 task Cat2 should be the prefered RP, then Cat 4 in case of Cat2 failure, DSG solution : Cat2 ip pim rp-candidate lo0 priority 200 Cat 4 ip pim rp-candidate lo0 priority 100 Following DocCD lowest is prefered for RP election so it should be the opposite. Reference : http://www.cisco.com/en/US/docs/ios/ipmulti/command/reference/imc_04.html#wp 1055223 Bsr task is ok as for BSR highest is prefered. Regards _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
