Hi there, Can anyone of you fellas tell me why ma I not getting the bgp peering between my R2 and R1. Although my configuration are all right, below are my configuration for R2 AND R1
R2(config-router)#do sr | s bgp router bgp 1 no bgp default ipv4-unicast bgp log-neighbor-changes neighbor peergroup peer-group neighbor peergroup remote-as 1 neighbor peergroup update-source Loopback0 neighbor 200.0.0.1 peer-group peergroup neighbor 200.0.0.5 peer-group peergroup ! address-family ipv4 neighbor peergroup route-reflector-client neighbor peergroup next-hop-self neighbor 200.0.0.1 activate neighbor 200.0.0.5 activate no auto-summary no synchronization exit-address-family R1 router bgp 1 no bgp default ipv4-unicast bgp log-neighbor-changes neighbor 200.0.0.2 remote-as 1 neighbor 200.0.0.2 update-source Loopback0 ! address-family ipv4 neighbor 200.0.0.2 activate no auto-summary no synchronization exit-address-family thanks, khaled _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
