Hi, I'm Having weird results with INE BGP 7.35 task
==============================
Rack1R1#sh run | b route
!
router bgp 100
no synchronization
bgp log-neighbor-changes
network 150.1.77.0 mask 255.255.255.0
aggregate-address 112.0.0.0 248.0.0.0 as-set summary-only attribute-map
attr_map
neighbor 155.1.13.3 remote-as 200
neighbor 155.1.146.4 remote-as 100
neighbor 155.1.146.4 route-reflector-client
neighbor 155.1.146.4 send-community
neighbor 155.1.146.6 remote-as 100
neighbor 155.1.146.6 route-reflector-client
neighbor 155.1.146.6 send-community
no auto-summary
!
!
route-map att_map permit 10
set community none
=================================
Rack1R4#sh run | b route
!
router bgp 100
no synchronization
bgp log-neighbor-changes
network 150.1.77.0 mask 255.255.255.0
network 155.1.146.0 mask 255.255.255.0
aggregate-address 155.1.0.0 255.255.0.0 summary-only
neighbor 155.1.45.5 remote-as 200
neighbor 155.1.146.1 remote-as 100
neighbor 155.1.146.1 send-community
neighbor 204.12.1.254 remote-as 54
neighbor 204.12.1.254 route-map no-export in
no auto-summary
!
ip prefix-list no-export seq 5 permit 112.0.0.0/24
!
route-map no-export permit 10
match ip address prefix-list no-export
set community no-export
!
route-map no-export permit 100
===========================
Basically my result doesn't match solution :
Rack1R4#sh ip bgp 112.0.0.0 255.0.0.0
BGP routing table entry for 112.0.0.0/8, version 23
Paths: (1 available, best #1, table Default-IP-Routing-Table)
Advertised to update-groups:
1 2
54 50 60
204.12.1.254 from 204.12.1.254 (31.3.0.1)
Origin IGP, localpref 100, valid, external, best
Rack1R4#sh ip bgp 112.0.0.0 248.0.0.0
BGP routing table entry for 112.0.0.0/5, version 4
Paths: (1 available, best #1, table Default-IP-Routing-Table)
Advertised to update-groups:
2
{54,50,60}, (aggregated by 100 150.1.1.1)
155.1.146.1 from 155.1.146.1 (150.1.1.1)
Origin IGP, metric 0, localpref 100, valid, internal, best
Rack1R1#sh ip bgp neighbors 155.1.13.3 advertised-routes
BGP table version is 46, local router ID is 150.1.1.1
Status codes: s suppressed, d damped, h history, * valid, > best, i -
internal,
r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*>i10.0.1.0/24 155.1.67.7 0 100 0 300 200 i
*>i28.119.16.0/24 204.12.1.254 0 100 0 54 i
*>i28.119.17.0/24 204.12.1.254 0 100 0 54 i
*> 112.0.0.0/5 0.0.0.0 100 32768 {54,50,60} i
*> 150.1.77.0/24 155.1.146.6 158720 32768 i
*>i155.1.0.0 155.1.146.4 0 100 0 i
Total number of prefixes 6
-------------------
I wonder if I'm missing something in config or my logic caused flaw
somewhere...thanks !
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
