Sean, http://www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a0080094bc5.shtml
Try this link I'm betting that your negotiation between the two trunk ports is something that's not compatible to negotiate trunking and you're going to need to change one type. Andy Sent from my iPad On Mar 19, 2012, at 10:11 PM, Sean James Gealon <[email protected]> wrote: > Hi all, > > Just want to ask help on my catalyst 3524 xl with inline power. > > My problem is, when I try configure this command below on my 2 3524xl > switches, the interface of both 3524xl switch will not come up. > Any help? > > > 3524xl(config)#interface f0/10 > 3524xl(config-if)#switchport trunk encapsulation dot1q > 3524xl(config-if)#switchport mode trunk > 3524xl(config-if)# no shut > > > > > 3524xl(config)#interface f0/20 > 3524xl(config-if)#switchport trunk encapsulation dot1q > 3524xl(config-if)#switchport mode trunk > 3524xl(config-if)# no shut > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
