Kumar, try to enable vtp v2 as it is disabled.
VTP Version reflects the capabilities of the device/code revision; VTP V2 Mode reflects the vtp version it is currently configured to operate in. Your output shows a device that is capable of running Version 2, but is running Version 1 currently, you can move it into version 2 by entering the "vtp version 2" command in global configuration mode. regards, On Thu, Mar 15, 2012 at 8:30 AM, karthk kumar <[email protected]>wrote: > Hi, > > When configuring sw2 as transparent mode, seeing that md5 is not matched > on the switches and any creation of vlan on sw1 i.e. server is not > propagation vtp updates to sw3 and sw4. If I change sw2 to client, md5 > shows correct on all switches and sw3 and sw4 learn vlan created on sw2 > (server). Am I missing anything?. Please, let me know. > > SW2#sh vtp status > VTP Version : 2 > Configuration Revision : 4 > Maximum VLANs supported locally : 1005 > Number of existing VLANs : 18 > VTP Operating Mode : Server >>>>>>>>>>>>>>>>>>>>>>> > VTP Domain Name : CCIE > VTP Pruning Mode : Disabled > VTP V2 Mode : Disabled > VTP Traps Generation : Disabled > MD5 digest : 0x3C 0xAF 0xD7 0xFB 0xB5 0x11 0xB4 0x4B > >>>>>>>>>>>>>>>>>> > Configuration last modified by 155.30.8.8 at 3-2-93 05:38:01 > Local updater ID is 155.30.8.8 on interface Vl8 (lowest numbered VLAN > interface found) > SW2# > SW2# > > > SW1#sh vtp status > VTP Version : 2 > Configuration Revision : 0 > Maximum VLANs supported locally : 1005 > Number of existing VLANs : 11 > VTP Operating Mode : Transparent >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > VTP Domain Name : CCIE > VTP Pruning Mode : Disabled > VTP V2 Mode : Disabled > VTP Traps Generation : Disabled > MD5 digest : 0x9B 0x27 0x73 0x7F 0xB4 0xB1 0xD3 0x29 > ==========>>>>>>> > Configuration last modified by 155.30.37.7 at 3-2-93 03:10:45 > SW1#conf t > Enter configuration commands, one per line. End with CNTL/Z. > SW1(config)#vtp mod clie > Setting device to VTP CLIENT mode. > SW1(config)# > +++++ > AFter changing to client. md5 matches > +++++ > > > SW1#sh vtp status > VTP Version : 2 > Configuration Revision : 4 > Maximum VLANs supported locally : 1005 > Number of existing VLANs : 18 > VTP Operating Mode : Client > VTP Domain Name : CCIE > VTP Pruning Mode : Disabled > VTP V2 Mode : Disabled > VTP Traps Generation : Disabled > MD5 digest : 0x3C 0xAF 0xD7 0xFB 0xB5 0x11 0xB4 0x4B > Configuration last modified by 155.30.8.8 at 3-2-93 05:38:01 > > > Thanks, > > Karthik. > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
