thanks guys, I've got it worked. I On Mon, Mar 5, 2012 at 6:53 PM, Marko Milivojevic <[email protected]>wrote:
> Are range summarizes routes when advertised between areas. Check the > routing table in your area 0 routers. > > -- > Marko Milivojevic - CCIE #18427 > > :: This message was sent from a mobile device. I apologize for errors and > brevity. :: > > On Mar 5, 2012, at 0:08, khaled al-ajeman <[email protected]> > wrote: > > > Hi there, > > > > Can anyone please help me to see why my summary route statment is not > > showing at area 10 router (R10) although my summary route is showing at > the > > ABR router (R5) only? > > > > R5 ------ ABR > > > > R5(config-router)#do sr | s os > > hostname R5 > > ip ospf network point-to-point > > ip ospf network point-to-point > > ip ospf network non-broadcast > > ip ospf priority 0 > > router ospf 1 > > router-id 10.10.1.5 > > log-adjacency-changes > > area 10 range 10.10.0.0 255.255.254.0 > > --------------------------------- > summary statement > > passive-interface default > > no passive-interface FastEthernet0/1 > > no passive-interface Serial0/2 > > no passive-interface Serial0/2.25 > > no passive-interface Loopback1 > > no passive-interface Loopback2 > > network 10.10.0.0 0.0.0.255 area 10 > > network 10.10.1.0 0.0.0.255 area 10 > > network 10.10.22.0 0.0.0.255 area 10 > > network 150.50.7.0 0.0.0.127 area 2 > > network 150.50.100.0 0.0.0.31 area 0 > > network 200.0.0.5 0.0.0.0 area 0 > > > > routing table at R5 > > > > Gateway of last resort is not set > > 200.0.0.0/32 is subnetted, 4 subnets > > O 200.0.0.2 [110/65] via 150.50.100.2, 00:10:24, Serial0/2.25 > > O 200.0.0.4 [110/129] via 150.50.100.2, 00:10:24, Serial0/2.25 > > C 200.0.0.5 is directly connected, Loopback0 > > O 200.0.0.6 [110/65] via 150.50.100.6, 00:10:24, Serial0/2.25 > > 10.0.0.0/8 is variably subnetted, 5 subnets, 2 masks > > C 10.10.0.0/24 is directly connected, Loopback1 > > O 10.10.0.0/23 is a summary, 00:10:47, > > Null0 ------------------------------------------------> my summary > > route is showing only at the ABR > > C 10.10.1.0/24 is directly connected, Loopback2 > > O IA 10.1.1.0/24 [110/138] via 150.50.100.2, 00:10:26, Serial0/2.25 > > C 10.10.22.0/24 is directly connected, FastEthernet0/1 > > 150.50.0.0/16 is variably subnetted, 3 subnets, 3 masks > > C 150.50.7.0/25 is directly connected, FastEthernet0/0 > > O 150.50.24.0/24 [110/128] via 150.50.100.2, 00:10:34, > Serial0/2.25 > > C 150.50.100.0/27 is directly connected, Serial0/2.25 > > R5(config-router)# > > R10 ( area 10 router ) > > > > R10(config-if)#do sr | s os > > hostname R10 > > router ospf 1 > > log-adjacency-changes > > passive-interface default > > no passive-interface FastEthernet0/1 > > network 10.10.22.0 0.0.0.255 area 10 > > > > output of routing table of R10 > > > > Gateway of last resort is not set > > 200.0.0.0/32 is subnetted, 4 subnets > > O IA 200.0.0.2 [110/75] via 10.10.22.5, 00:04:59, FastEthernet0/1 > > O IA 200.0.0.4 [110/139] via 10.10.22.5, 00:04:59, FastEthernet0/1 > > O IA 200.0.0.5 [110/11] via 10.10.22.5, 00:04:59, FastEthernet0/1 > > O IA 200.0.0.6 [110/75] via 10.10.22.5, 00:04:59, FastEthernet0/1 > > 10.0.0.0/24 is subnetted, 4 subnets > > O 10.10.0.0 [110/11] via 10.10.22.5, 00:04:59, FastEthernet0/1 > > O 10.10.1.0 [110/11] via 10.10.22.5, 00:04:59, > > FastEthernet0/1 ----------------------------- NO singe of my > > summary route at the area 10 table, why ? > > O IA 10.1.1.0 [110/148] via 10.10.22.5, 00:05:00, FastEthernet0/1 > > C 10.10.22.0 is directly connected, FastEthernet0/1 > > 150.50.0.0/16 is variably subnetted, 3 subnets, 3 masks > > O IA 150.50.7.0/25 [110/20] via 10.10.22.5, 00:05:00, FastEthernet0/1 > > O IA 150.50.24.0/24 [110/138] via 10.10.22.5, 00:05:00, > FastEthernet0/1 > > O IA 150.50.100.0/27 [110/74] via 10.10.22.5, 00:05:02, > FastEthernet0/1 > > R5 -ABR and R10 - area 10 router area forming neighbor relationship > > togather. > > > > R10(config-if)#do sh ip os nei > > Neighbor ID Pri State Dead Time Address > Interface > > 10.10.1.5 1 FULL/DR 00:00:38 10.10.22.5 > > FastEthernet0/1 > > R10(config-if)# > > > > > > thanks so much guys, > > > > khaled > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > > > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
