Hi,
Applied a local pref value for network 11.0.0.0 (as shown below), so the best
route will prefer 10.1.12.1 (3 hops) than 10.1.14.1 (1 hop).
But when I do a traceroute, the result still gone through 10.1.14.1. Can
anybody help on what's missing here? Thanks
Rgds
Ben
R4(config-router)#do sib
BGP table version is 7, local router ID is 4.4.4.4
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.0.0.0 10.1.14.1 0 400 0 100 i
*>i2.0.0.0 10.1.23.2 0 100 0 i
*>i3.0.0.0 10.1.34.3 0 100 0 i
*> 4.0.0.0 0.0.0.0 0 32768 i
*>i11.0.0.0 10.1.12.1 0 400 0 100 i
* 10.1.14.1 0 0 100 i
R4(config-router)#do trace 11.1.1.1
Type escape sequence to abort.
Tracing the route to 11.1.1.1
1 10.1.14.1 12 msec * 0 msec
R4(config-router)#do sir 11.0.0.0
Routing entry for 11.0.0.0/8
Known via "bgp 200", distance 200, metric 0
Tag 100, type internal
Last update from 10.1.12.1 00:01:14 ago
Routing Descriptor Blocks:
* 10.1.12.1, from 10.1.23.2, 00:01:14 ago
Route metric is 0, traffic share count is 1
AS Hops 1
Route tag 100
MPLS label: none
R4(config-router)#
R4(config-router)#do trace 11.1.1.1
Type escape sequence to abort.
Tracing the route to 11.1.1.1
1 10.1.14.1 4 msec * 4 msec
R4(config-router)#
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
