Hello Folks Appreciate all of the confirmation..
Also to note, while it would be interesting to build it from scratch, I have done way too many of these configurations, including support for tag switching that I go the short route to get to what is needed for the lab so I can have this up and operational in the shortest amount of time possible :-) ..
Hopefully I'll have this up and operational here over the weekend with full internet access! :-P
Cheers Joe On 02/25/2012 08:55 AM, [email protected] wrote:
Learn to build it youself, trust me you want to know how Sent via BlackBerry from T-Mobile -----Original Message----- From: Joe Danrich<[email protected]> Sender: [email protected] Date: Sat, 25 Feb 2012 08:43:50 To: [email protected]<[email protected]> Subject: [OSL | CCIE_RS] Proctor Labs - Frame-Switch Config I am now building a hardware lab with 1841's, 2811, 2821, 3825, 3845 and 3750's switches that I have to mimic as close as possible the ProctorLabs set-up that is used for the IPE Lab books. I was looking for the frame-switch confguration which I believe I stumbled upon on Joe Astorino's blog postg in 2009 that provides the configuration of the ProctorLab Frame-swtich. Here is what I found and I was wondering if anyone knew if this was the relevant configuration? frame-relay switching ! interface Serial0 description R2 Serial no ip address encapsulation frame-relay clockrate 64000 frame-relay intf-type dce frame-relay route 204 interface Serial1 402 frame-relay route 205 interface Serial2 502 frame-relay route 206 interface Serial3 602 frame-relay route 214 interface Serial1 412 frame-relay route 215 interface Serial2 512 frame-relay route 216 interface Serial3 612 frame-relay route 224 interface Serial1 422 frame-relay route 225 interface Serial2 522 frame-relay route 226 interface Serial3 622 ! interface Serial1 description R4 Serial no ip address encapsulation frame-relay clockrate 64000 frame-relay intf-type dce frame-relay route 402 interface Serial0 204 frame-relay route 405 interface Serial2 504 frame-relay route 406 interface Serial3 604 frame-relay route 412 interface Serial0 214 frame-relay route 415 interface Serial2 514 frame-relay route 416 interface Serial3 614 frame-relay route 422 interface Serial0 224 frame-relay route 425 interface Serial2 524 frame-relay route 426 interface Serial3 624 ! interface Serial2 description R5 Serial no ip address encapsulation frame-relay clockrate 64000 frame-relay intf-type dce frame-relay route 502 interface Serial0 205 frame-relay route 504 interface Serial1 405 frame-relay route 506 interface Serial3 605 frame-relay route 512 interface Serial0 215 frame-relay route 514 interface Serial1 415 frame-relay route 516 interface Serial3 615 frame-relay route 522 interface Serial0 225 frame-relay route 524 interface Serial1 425 frame-relay route 526 interface Serial3 625 ! interface Serial3 description R6 Serial no ip address encapsulation frame-relay clockrate 64000 frame-relay intf-type dce frame-relay route 602 interface Serial0 206 frame-relay route 604 interface Serial1 406 frame-relay route 605 interface Serial2 506 frame-relay route 612 interface Serial0 216 frame-relay route 614 interface Serial1 416 frame-relay route 615 interface Serial2 516 frame-relay route 622 interface Serial0 226 frame-relay route 624 interface Serial1 426 frame-relay route 625 interface Serial2 526 ! It sure would help to have this so I wouldn't have to re-invent the wheel! Thanks Joe _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
