Hey Marc, I have seen this while running the command in GNS3 only, not when doing this on real hardware. One thing to note is that the OSPF fast hello feature is very CPU intensive and this may be the issue. Also you might want to check the reliability of the link as well. Others may have more input on this but I have seen it as well. Cheers!
/Steve ________________________________________ From: [email protected] [[email protected]] On Behalf Of marc abel [[email protected]] Sent: Sunday, October 02, 2011 9:02 AM To: [email protected] Subject: [OSL | CCIE_RS] ip ospf dead-interval minimal Does anyone ever have an issue with the adjacency dropping occasionally after using this command? ip ospf dead-interval minimal hello multiplier 4 Mine seems to drop every several minutes but always immediately recovers. Is this just a case that the router got busy and missed 1 seconds worth or hellos? Or is there something I should be trying to troubleshoot further? Thank you, Marc _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com UHS Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this information is prohibited. If this was sent to you in error, please notify the sender by reply e-mail and destroy all copies of the original message. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
