Hey Jay, Are you saying if i switch to transparent mode the vlan info is saved in the running config instead of the vlan.dat file ?
That would be cool. On Jul 14, 2011, at 3:26 PM, Jay Taylor wrote: > Usually the biggest headache is that it doesn't save the VLAN config if > you're in client/server mode because that doesn't appear in the config file. > Switch to vtp transparent mode and it should save correctly. > > When I was labbing I'd keep a text file that had a section for each > task/device and what commands I'd pasted in to accomplish it. That helped > troubleshoot if I went wrong somewhere because I had a clear record of > everything done so far. It also made it easy to pick up an unfinished lab > where I'd left off or work on previously completed labs at a particular task > I wanted to work on more without starting from scratch. This is how my text > files would look: > > > 1.1 Cat1 > --------- > vtp mode server > vtp domain apples > vtp password oranges > vtp interface lo1 > > vlan 100 > vlan 200 > vlan 12 > vlan 67 > vlan 123 > exit > > int ra fa0/19 - 20 , gi0/1 > shut > > int ra fa0/21-22 > shut > channel-group 21 mode on > > int ra fa0/23-24 > shut > channel-group 23 mode on > > int po21 > sw trunk encap dot1q > sw mode trunk > sw nonegotiate > sw trunk native vlan 123 > > int po23 > sw trunk encap dot1q > sw mode trunk > sw nonegotiate > sw trunk native vlan 123 > > int fa0/4 > sw mode acc > sw acc vlan 200 > > int fa0/11 > sw mode acc > sw acc vlan 100 > > int g0/2 > sw mode acc > sw acc vlan 12 > > > > 1.1 Cat2-4 > ----------- > vtp mode client > vtp domain apples > vtp password oranges > > int ra fa0/19 - 20 , gi0/1-2 > shut > > int ra fa0/21-22 > shut > channel-group 21 mode on > > int ra fa0/23-24 > shut > channel-group 23 mode on > > int po21 > sw trunk encap dot1q > sw mode trunk > sw nonegotiate > sw trunk native vlan 123 > > int po23 > sw trunk encap dot1q > sw mode trunk > sw nonegotiate > sw trunk native vlan 123 > > > 1.1 Cat2 > -------- > vtp interface lo1 > > int fa0/12 > sw mode acc > sw acc vlan 200 > > int fa0/1 > sw mode acc > sw acc vlan 12 > > int fa0/6 > sw mode acc > sw acc vlan 67 > > int fa0/7 > sw mode acc > sw acc vlan 67 > > > 1.1 Cat4 > -------- > int fa0/7 > sw mode acc > sw acc vlan 100 > > > 1.1 All Cats > ------------ > int ra fa0/21-24 , po21 , po23 > no shut > > > > > > > > 1.2 Cat1 > --------- > spanning-tree vlan 12,67,100 root primary > int ra fa0/4 , fa0/11 , gi0/2 > spann portfast > > 1.2 Cat2 > --------- > spanning-tree vlan 200 root primary > int ra fa0/1 , fa0/12 , fa0/6-7 > spann portfast > > > > > 1.3 Cat1 > --------- > int fa0/1 > no switchport > ip add 141.141.35.35 255.255.255.0 > no shut > > > > > 1.4 Cat2 > -------- > ip dhcp snooping vlan 67 > system mtu 1508 > sdm prefer routing > do wr mem > do reload > > > > > > > > > > > > > 2.1 R2 > ------- > int s0/1/0 > encap frame > no frame inv > frame map ip 141.41.26.5 205 br > frame map ip 141.41.26.6 206 br > frame map ip 141.41.26.2 206 > > 2.1 R6 > ------- > int s0/1/0 > encap frame > no frame inv > frame map ip 141.41.26.2 602 br > frame map ip 141.41.26.5 602 > frame map ip 141.41.26.6 602 > > 2.1 R5 > ------ > int s0/1/0 > encap frame > no frame inv > int s0/1/0.1 multipoint > ip add 141.41.26.5 255.255.255.0 > frame map ip 141.41.26.2 502 br > frame map ip 141.41.26.6 502 > frame map ip 141.41.26.5 502 > > > > On Thu, Jul 14, 2011 at 8:13 AM, Christophe Lemaire > <[email protected]> wrote: > It worked for me several time in the past but since few weeks it don't > work anymore.... > > Christophe > > On Thu, Jul 14, 2011 at 12:36 PM, Alef <[email protected]> wrote: > > Does anyone have any success with saving configs in proctorlabs? > > I tried yesterday and the day before, no go. > > > > Takes forever and the end result that it just didn't save anything. > > > > Alef > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > > www.PlatinumPlacement.com > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > > > -- > > Jay Taylor > CCIE #28391 > @JTIE_6EE7 > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
