Hey Marc,
Try this
Inter fa0/0
ipv6 address autoconfig default
R7(config-if)#do sh ipv6 route | beg ::/0
S ::/0 [1/0]
via FE80::202:4BFF:FECB:9442, Ethernet0/1
via FE80::207:EFF:FE9C:A3C1, Ethernet0/0
That should do it
Oh send me a unicast offline when you have time
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of marc abel
Sent: Friday, July 01, 2011 8:32 PM
To: [email protected]
Subject: [OSL | CCIE_RS] IPV6 Stateless autoconfig
Can anyone explain how to setup IPV6 Stateless autoconfig and use it
to hand out a default route to a peer router? The documentation is
pretty weak, it describes it but I can't find any actual config.
Thanks,
Marc
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
UHS Confidentiality Notice: This e-mail message, including any attachments, is
for the sole use of the intended recipient (s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution of this information is prohibited. If this was sent to you in
error, please notify the sender by reply e-mail and destroy all copies of the
original message.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
