Never mind, on Task 19.9 we are asked to ensure that R6 will not become the active router unless R5 and R7 fail. With my configuration this isn't possible, therefore two groups are needed.
:) Thank you, Steve Di Bias Network Engineer - Information Systems Valley Health System - Las Vegas Office - 702- 369-7594 Cell - 702-241-1801 [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Di Bias, Steve Sent: Wednesday, June 29, 2011 11:16 AM To: OSL Routing and Switching Subject: [OSL | CCIE_RS] Lab 19 Task 8 (need verification please) Hey Experts! Task 19.8 tells us to configure some secondary IP's on the VLAN 567 interfaces of R5, R6, and R7 with secondary HSRP groups. On this attempt I used the "secondary" keyword within the same standby group number as opposed to using a separate group. Everything seems to work just fine, just want some assurance as to if my configs are good or not. Thanks in advance! R5 interface FastEthernet0/0 ip address 150.100.222.5 255.255.255.0 secondary ip address 150.100.220.5 255.255.255.0 standby version 2 standby 1 ip 150.100.222.10 secondary standby 1 preempt standby 1 authentication md5 key-string 7 046B0A050400585A081A0E R6 interface FastEthernet0/0 ip address 150.100.222.6 255.255.255.0 secondary ip address 150.100.220.6 255.255.255.0 standby version 2 standby 1 ip 150.100.220.1 standby 1 ip 150.100.222.10 secondary standby 1 timers 20 60 standby 1 priority 110 standby 1 preempt delay minimum 60 standby 1 authentication md5 key-string 7 107E081A0E36061F0D0721 standby 1 track 1 decrement 15 standby 1 track 2 decrement 15 R7 interface FastEthernet0/0 ip address 150.100.222.7 255.255.255.0 secondary ip address 150.100.220.7 255.255.255.0 standby version 2 standby 1 ip 150.100.220.1 standby 1 ip 150.100.222.10 secondary standby 1 timers 20 60 standby 1 preempt standby 1 authentication md5 key-string 7 046B0A050400585A081A0E Show commands below: R5(config-if)#do sh stand FastEthernet0/0 - Group 1 (version 2) State is Learn 3 state changes, last state change 00:08:26 Virtual IP address is unknown Secondary virtual IP address 150.100.222.10 Active virtual MAC address is 0000.0c9f.f001 Local virtual MAC address is 0000.0c9f.f001 (v2 default) Hello time 20 sec, hold time 60 sec Authentication MD5, key-string Preemption enabled Active router is 150.100.220.6, priority 110 (expires in 47.536 sec) MAC address is e804.6224.d2a8 Standby router is 150.100.220.7, priority 100 (expires in 58.224 sec) Priority 100 (default 100) Group name is "hsrp-Fa0/0-1" (default) R6(config-if)#do sh stand FastEthernet0/0 - Group 1 (version 2) State is Active 8 state changes, last state change 00:19:54 Virtual IP address is 150.100.220.1 Secondary virtual IP address 150.100.222.10 Active virtual MAC address is 0000.0c9f.f001 Local virtual MAC address is 0000.0c9f.f001 (v2 default) Hello time 20 sec, hold time 60 sec Next hello sent in 10.016 secs Authentication MD5, key-string Preemption enabled, delay min 60 secs Active router is local Standby router is 150.100.220.7, priority 100 (expires in 57.392 sec) Priority 110 (configured 110) Track object 1 state Up decrement 15 Track object 2 state Up decrement 15 Group name is "hsrp-Fa0/0-1" (default) R7(config-if)#do sh stand FastEthernet0/0 - Group 1 (version 2) State is Standby 10 state changes, last state change 00:19:25 Virtual IP address is 150.100.220.1 Secondary virtual IP address 150.100.222.10 Active virtual MAC address is 0000.0c9f.f001 Local virtual MAC address is 0000.0c9f.f001 (v2 default) Hello time 20 sec, hold time 60 sec Next hello sent in 8.320 secs Authentication MD5, key-string Preemption enabled Active router is 150.100.220.6, priority 110 (expires in 57.776 sec) MAC address is e804.6224.d2a8 Standby router is local Priority 100 (default 100) Group name is "hsrp-Fa0/0-1" (default) //Steve UHS Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this information is prohibited. If this was sent to you in error, please notify the sender by reply e-mail and destroy all copies of the original message. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com UHS Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this information is prohibited. If this was sent to you in error, please notify the sender by reply e-mail and destroy all copies of the original message. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
