It is required only if you are explicitly asked to do it, otherwise no.

Please note that in 12.4T, MD5 RIP authentication fails inexplicably
most of the time.

--
Marko Milivojevic - CCIE #18427
Senior Technical Instructor - IPexpert

FREE CCIE training: http://bit.ly/vLecture

Mailto: [email protected]
Telephone: +1.810.326.1444
Web: http://www.ipexpert.com/

On Sun, Apr 17, 2011 at 06:35, Samir Idris <[email protected]> wrote:
> Hi,
>
> A quick question:
>
> When configuring RIP authentication, is it necessary to specify the send and
> accept lifetime?  I think not.  Am I right?
>
> Key-chain R2R4:
>    key 1 -- text "ipexpert_R2toR4"
>        accept lifetime (always valid) - (always valid) [valid now]
>        send lifetime (always valid) - (always valid) [valid now]
>
>
> R2(config-subif)#do sh ip proto
> Routing Protocol is "rip"
>  Outgoing update filter list for all interfaces is not set
>  Incoming update filter list for all interfaces is not set
>  Incoming routes will have 5 added to metric if on list R8
>  Sending updates every 30 seconds, next due in 19 seconds
>  Invalid after 180 seconds, hold down 0, flushed after 240
>  Redistributing: rip
>  Default version control: send version 2, receive version 2
>    Interface             Send  Recv  Triggered RIP  Key-chain
>    FastEthernet0/0       2     2
>    Serial0/1.24          2     2                    R2R4
>    Serial0/1.25          2     2
>    Serial0/1.26          2     2
>  Automatic network summarization is not in effect
>  Maximum path: 4
>  Routing for Networks:
>    0.0.0.0
>  Passive Interface(s):
>    Serial0/0
>    FastEthernet0/1
>    Serial0/1
>    Serial0/2
>    Serial0/3
>    FastEthernet1/0
>    FastEthernet1/1
>    FastEthernet1/2
>    FastEthernet1/3
>    FastEthernet1/4
>    FastEthernet1/5
>    FastEthernet1/6
>    FastEthernet1/7
>    FastEthernet1/8
>    FastEthernet1/9
>    FastEthernet1/10
>    FastEthernet1/11
>  Passive Interface(s):
>    FastEthernet1/12
>    FastEthernet1/13
>    FastEthernet1/14
>    FastEthernet1/15
>    Vlan1
>    VoIP-Null0
>  Routing Information Sources:
>    Gateway         Distance      Last Update
>    150.100.100.6        120      00:00:24
>    150.100.100.5        120      00:00:01
>    150.100.24.4         120      00:01:54
>    150.100.12.1         120      00:00:12
>  Distance: (default is 120)
>
> Apr 17 15:33:49.891: RIP: ignored v2 packet from 150.100.24.4 (invalid
> authentication)
>
> Regards,
> Samir Idris.
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to