Good point made. I did use interface-dlci when I converted the interfaces to sub point-to-points. All works.
Regards, Jay McMickle- CCNP,CCSP,CCDP Sent from my iPhone http://mycciepursuit.wordpress.com On Apr 10, 2011, at 7:36 AM, Jay Taylor <[email protected]> wrote: > With RIP it really won't make a difference as long as you've configured Frame > Relay right. I'm guessing the DSG wanted to point out that you need the > broadcast statement in your frame maps with multipoint. > > > > On Sat, Apr 9, 2011 at 2:20 PM, Jay McMickle <[email protected]> wrote: > Experts and those of the liking- > > I'm working on Vol1 Lab 8, section 8.8. The lab states to implement RIP MD5 > authentication on R2 to R5 and R6. While you can't put a single key chain on > a > RIP interface, it's obvious that you must break this multi-point interface > up. > > > I took s0/1/0.256 multipoint and made it two sub interface point to point > interfaces. The DSG shows making it two multipoint interfaces. > > I guess this shows that I don't know the difference, but would be drawbacks be > to having two P2P interfaces over two MP interfaces? > > Thanks to all the labbers and Experts... > > > Regards, > Jay McMickle- CCNP, CCSP, CCDP, MCSE > http://mycciepursuit.wordpress.com/ > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > > -- > > Jay Taylor > CCIE #28391 > @JTIE_6EE7 > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
