? Hey guys, I have a question concerning lab 30.7. I can't put an ip address on the R5 fa0/0.59 interface. Do I need to put the encapsulation dot1q 59 native cmd on there and change the switchport config to accept a subinterface from R5? This labs base config had a lot of ip address mistakes that needed to be fixed to get reachability on R2/R5/R6. I'm getting this message:
R5(config-router-af)#int fa0/0.59 R5(config-subif)#ip add 150.50.59.5 255.255.255.0 % Configuring IP routing on a LAN subinterface is only allowed if that subinterface is already configured as part of an IEEE 802.10, IEEE 802.1Q, or ISL vLAN. Thank you, Chris R5 Config R5(config-subif)#do sh run Building configuration... Current configuration : 2877 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R5 ! boot-start-marker warm-reboot boot-end-marker ! logging message-counter syslog ! no aaa new-model memory-size iomem 15 ! dot11 syslog ip source-route ! ! ip cef ! ! ip vrf VPNA rd 256:1 route-target export 256:1 route-target import 256:1 ! ip vrf VPNB rd 256:2 route-target export 256:2 route-target import 256:2 ! no ipv6 cef ! multilink bundle-name authenticated ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! voice-card 0 ! ! ! ! ! archive log config hidekeys ! ! ! ! ! ! ! ! ! interface Loopback0 ip address 200.0.0.5 255.255.255.255 ! interface FastEthernet0/0 no ip address duplex auto speed auto ! interface FastEthernet0/0.15 encapsulation dot1Q 15 native ip vrf forwarding VPNA ip address 150.50.15.5 255.255.255.0 ! interface FastEthernet0/0.59 ip vrf forwarding VPNB ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/1/0 no ip address encapsulation frame-relay no arp frame-relay no frame-relay inverse-arp frame-relay lmi-type cisco ! interface Serial0/1/0.25 point-to-point ip address 150.50.25.1 255.255.255.252 snmp trap link-status mpls ip frame-relay interface-dlci 501 ! interface Serial0/1/0.56 point-to-point ip address 150.50.56.1 255.255.255.252 snmp trap link-status mpls ip frame-relay interface-dlci 506 ! interface Serial0/2/0 no ip address shutdown ! router eigrp 59 59 auto-summary ! address-family ipv4 vrf VPNB redistribute bgp 256 metric 2000 1000 255 1 1500 59 network 150.50.59.0 0.0.0.0 no auto-summary exit-address-family ! router ospf 2 log-adjacency-changes network 150.50.25.1 0.0.0.0 area 0 network 150.50.56.1 0.0.0.0 area 0 network 200.0.0.5 0.0.0.0 area 0 ! router rip ! address-family ipv4 vrf VPNA redistribute bgp 256 metric 3 network 150.50.0.0 no auto-summary version 2 exit-address-family ! router bgp 256 no bgp default ipv4-unicast bgp log-neighbor-changes neighbor 200.0.0.2 remote-as 256 neighbor 200.0.0.2 update-source Loopback0 neighbor 200.0.0.6 remote-as 256 neighbor 200.0.0.6 update-source Loopback0 ! address-family vpnv4 neighbor 200.0.0.2 activate neighbor 200.0.0.2 send-community extended neighbor 200.0.0.6 activate neighbor 200.0.0.6 send-community extended exit-address-family ! address-family ipv4 vrf VPNB redistribute eigrp 59 no synchronization exit-address-family ! address-family ipv4 vrf VPNA redistribute rip no synchronization exit-address-family ! ip forward-protocol nd ip http server no ip http secure-server ! ! ! ! ! ! ! ! ! mpls ldp router-id Loopback0 ! control-plane ! ! ! ccm-manager fax protocol cisco ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 line aux 0 line vty 0 4 login ! scheduler allocate 20000 1000 end R9 Config R9(config-router)#do sh run Building configuration... Current configuration : 1088 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R9 ! boot-start-marker warm-reboot boot-end-marker ! logging message-counter syslog ! no aaa new-model memory-size iomem 15 ! dot11 syslog ip source-route ! ! ip cef ! ! no ipv6 cef ! multilink bundle-name authenticated ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! voice-card 0 ! ! ! ! ! archive log config hidekeys ! ! ! ! ! ! ! ! ! interface FastEthernet0/0 ip address 150.50.79.9 255.255.255.0 duplex auto speed auto ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/2/0 no ip address shutdown no fair-queue ! interface Serial0/2/1 no ip address shutdown ! router eigrp 59 network 150.50.59.9 0.0.0.0 network 200.0.0.9 0.0.0.0 no auto-summary ! ip forward-protocol nd ip http server no ip http secure-server ! ! ! ! ! ! ! ! ! ! control-plane ! ! ! ccm-manager fax protocol cisco ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 line aux 0 line vty 0 4 login ! scheduler allocate 20000 1000 end This email and any files transmitted with it are confidential and are intended for the sole use of the individual(s) to whom they are properly addressed. Any use, dissemination or forwarding of this email and any files transmitted with it by anyone other than the intended recipient(s) is strictly prohibited. If you have received this email in error, please notify the sender by replying to this email. Black Box Corporation and its affiliates reserve the right to scan and monitor all e-mail traffic. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
