I tried with and without that with the same results. Do you have to re-establish pim neighbor relationships after changing that?
On Fri, Jul 30, 2010 at 2:03 PM, Tyson Scott <[email protected]> wrote: > Do you have ip pim nbma-mode on the hub interface. > > > > Regards, > > > > Tyson Scott - CCIE #13513 R&S, Security, and SP > > Managing Partner / Sr. Instructor - IPexpert, Inc. > > Mailto: [email protected] > > Telephone: +1.810.326.1444, ext. 208 > > Live Assistance, Please visit: www.ipexpert.com/chat > > eFax: +1.810.454.0130 > > > > IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, > Audio Tools, Online Hardware Rental and Classroom Training for the Cisco > CCIE (R&S, Voice, Security & Service Provider) certification(s) with > training locations throughout the United States, Europe, South Asia and > Australia. Be sure to visit our online communities at > www.ipexpert.com/communities and our public website at www.ipexpert.com > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Aaron Moreck > *Sent:* Friday, July 30, 2010 1:44 PM > *To:* [email protected] > *Subject:* [OSL | CCIE_RS] PIM-SM on DMVPN > > > > Hello i am configuring PIM-SM on a DMVPN. We also have an ASA5510 in the > mix. > > The topology is as follows: > > > > > > > > > > > > DMVPN Spokes (Remotes)-------------------- DMVPN Hub > Router-------------Cisco ASA 5510-----------Cat3560 > > > > > > Most of the Multicast traffic would be sourced from a server attached to a > vlan on the Cat3560 and destined to members on the DMVPN remote sites. > > > > I used static RP assignement on all devices making the RP the DMVPN Hub > router. I chose this because the ASA does not support Auto RP or BSR. > Also a note that the ASA does not support Dense-Mode. > > > > One of the issues i am having that i am most interested about is that if i > use the "ip igmp join " on one of the DMVPN Spokes (remote sites) and i > try to ping the multicast group from the network on the 3560 it works like a > charm. However if i ping that same address from a DMVPN spoke the ping > ususall succedes two times then fails. I am assuming this is tied to > when the dynamic tunnel is brought up between the spokes. > > > > Does anyone have any ideas of the top of their heads regarding this before > i need to post configurations? > > > > Thanks > > > > Aaron > > > > > > > > > > > > > > > > > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
