Hello people,
I would appreciate any ideas about this. I have R1 as router on a stick
conected to the switch Cat1 via trunk. To the same switch there is R2
connected. I can ping R1 to Cat1, but no pings from R1 to R2. With system mtu
1522 on Cat1 also no results. Here are the configs.
R1 :
interface GigabitEthernet 0/0
no ip address
interface g0/0.2
encapsulation dot1q vlan 2
ip address 2.2.2.1 255.255.255.0
interface g0/0.4
encapsulation dot1q vlan 4
ip address 4.4.4.1 255.255.255.0
Cat1:
interface FastEthernet 0/10
description Connection to R1 G0/0
switchport trunk encapsulation dot1q
switchport mode trunk
interface vlan 2
ip address 2.2.2.2 255.255.255.0
interface FastEthernet 0/11
description Connection to R2 F0/0
switchport mode access
switchport access vlan 4
R2:
interface FastEthernet 0/0
ip address 4.4.4.2 255.255.255.0
R1# ping 2.2.2.2
!!!!!
R1# ping 4.4.4.2
.....
thanks a lot for any ideas!
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
