Cyrus, Please use the topology provided here: http://blog.ipexpert.com/2010/03/31/gns3-on-windows-7-the-ipexpert-way/
This will work for the entire setup run thru the Video on Demand. When you start the routers then create the sub-interfaces. Regards, Tyson Scott - CCIE #13513 R&S, Security, and SP Managing Partner / Sr. Instructor - IPexpert, Inc. Mailto: [email protected] Telephone: +1.810.326.1444, ext. 208 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (R&S, Voice, Security & Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com -----Original Message----- From: cyrus riobah [mailto:[email protected]] Sent: Tuesday, July 06, 2010 12:53 PM To: Tyson Scott Cc: [email protected] Subject: Re: [OSL | CCIE_RS] Frame-Relay .net file Thanks a lot Tyson, The configs am trying to edit for Dynamips are as below. Kindly look at it. Immediately i run Dynamips, i get receive the error i described above. What am i not defining correctly? Will appreciate your kind assistance. # A Simple frame relay lab autostart = false [localhost] [[7200]] image = E:\\myn\IOS\7200 advnterprise\c7200-adventerprisek9-mz.124-4.T1.bin # On Linux / Unix use forward slashes: #image = /opt/7200-images/c7200-jk9o3s-mz.124-7a.image npe = npe-400 ram = 160 [[ROUTER R2]] s1/0.256 = F1 1 s1/0.24 = F2 1 [[ROUTER R5]] s1/0 = F1 2 [[ROUTER R6]] s1/0 = F1 3 s1/1 = R9 s1/1 s1/2 = R9 s1/2 [[ROUTER R9]] s1/1 = R6 s1/1 s1/2 = R6 s1/2 [[ROUTER R4]] s1/0 = F2 2 [[FRSW F1]] 1:206 = 3:602 1:205 = 2:502 2:502 = 3:602 [[FRSW F2]] 1:204 = 2:402 On 7/6/10, Tyson Scott <[email protected]> wrote: > You add these to the interface in running configuration not in the .net > file. > > > > Regards, > > > > Tyson Scott - CCIE #13513 R&S, Security, and SP > > Managing Partner / Sr. Instructor - IPexpert, Inc. > > Mailto: [email protected] > > Telephone: +1.810.326.1444, ext. 208 > > Live Assistance, Please visit: www.ipexpert.com/chat > > eFax: +1.810.454.0130 > > > > IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, > Audio Tools, Online Hardware Rental and Classroom Training for the Cisco > CCIE (R&S, Voice, Security & Service Provider) certification(s) with > training locations throughout the United States, Europe, South Asia and > Australia. Be sure to visit our online communities at > www.ipexpert.com/communities and our public website at www.ipexpert.com > <http://www.ipexpert.com/> > > > > From: [email protected] > [mailto:[email protected]] On Behalf Of cyrus riobah > Sent: Tuesday, July 06, 2010 10:20 AM > To: [email protected] > Subject: [OSL | CCIE_RS] Frame-Relay .net file > > > > Hi All, > > Am working on one of Joe Astorino's frame relay VOD lab on dynampis and i am > trying to edit the config so as to add 2 subinterfaces to a router connected > to two frame relay switches. Am getting the below error. > > Where am going wrong? Please assist. > > Reading configuration file... > > *** Warning: Connecting R2 s1/0.256 to F2 1 resulted in: > 205-VM R2: unable to add binding for slot 1/0 > *** Warning: Connecting F2 1:204 to 2:402 resulted in: > switchport 1 is not connected to anything > > *** Error: errors during loading of the topology file, please correct them > Press ENTER to continue > > Regards > > > > > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
