Configs Regards, Tyson Scott - CCIE #13513 R&S, Security, and SP Managing Partner / Sr. Instructor - IPexpert, Inc. Mailto: [email protected] Telephone: +1.810.326.1444, ext. 208 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130
IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (R&S, Voice, Security & Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mark Beynon Sent: Friday, July 02, 2010 1:26 PM To: CCIE OSL Subject: [OSL | CCIE_RS] Ebgp route selection.. I have two routers connected via ebgp. Each router has the same static route defined and redistributed into bgp. I want both routers to prefer the route advertised by router 1. If I set an AD on the static route on router 2 of greater than 20, this is how it comes up, with a preference for router 1. If I remove the route on router 1, it fails over as I would expect as the floating static kicks in and is redistributed. When I restore the route on router 1, router 2 does not fail back. I now see both routes in the bgp table of router 2, and the local route is prefered, Whig I think is why the AD is not consulted I can't find anyway to influence this, once the route is already in use on router 2. Any ideas? Thanks!! Sent from my iPhone _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
