hey guys, just thought I would throw out a problem I have been having running the IPexpert dynamips topology with 3725's using c3725-adventerprisek9-mz.124-15.T5.image...
my problem is that I cannot successfully ping an SVI interface that I create on the etherswitch modules.. here is my setup, very straighforward: R1 int f0/0 ip add 10.1.12.1 255.255.255.0 Cat1 int f1/1 switchport mode access switchport access vlan 12 spanning portfast int vlan 12 ip add 10.1.12.2 255.255.255.0 Routing is enabled on the switch.. I simply cannot ping the SVI interface of Cat1. If I do a "sho arp" I can see the mac of R1 however. When I run "debug ip packet" I see "encapsulation failed" I've tried other 3725 IOS versions and I get the same result. I'm wondering if this might be a bug in dynamips? Strange thing is that if I use a 3640 image and tweak my .net file I can ping the SVI. Has anyone else had this problem? What versions of 3725 IOS are you guys running? Thanks I appreciate everyone's help!
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
