Thanks Matt, I expect and can handle the odd crash. Problem was thi was every tome after configuring frame relay on r2. In the frame lab this being the hub it is kind of important. And I expect it will be in future labs.
However.... Followed LJ's advice and disabled thoughs three lines..., and it has not crashed. I have for the first time moved on through the lab. Fingers crossed!!! P.s thanks all! I am finding this forum just as valuable as the BLS! Great support Sent from my iPhone On 24 Mar 2010, at 06:57, Matt Hill <[email protected]> wrote: > My R2 crashes at random times, but EVERY time you do a show run. > > Bit of a pain but you just need to deal with it. > > I also find that R6 and R9 like to crash if you use the serial link > between them - my workaround is to not use the serial link, and use > the F0/1s going through Cat4. > > But I dont whinge. Its free so I cant complain :) > > Cheers, > Matt > > CCIE #22386 > CCSI #31207 > > On 24 March 2010 17:53, Mark Beynon <[email protected]> wrote: >> Thanks LJ, I did consider this but in the configs I downloaded there >> isn't much to consider tidying up. >> >> I'm gonna try now with the following lines commented out... Or >> negated >> >> Memory-size iomem 15 >> Ip http server >> Scheduler allocate 20000 1000 >> >> I have also ugraded to gns 3.07 just in case. I am working in ubuntu, >> so with just these two routers running CPU/ram should not be problem. >> >> Thanks again >> >> Sent from my iPhone >> >> On 23 Mar 2010, at 17:31, "LJ" <[email protected]> wrote: >> >>> Yes I did until I cleaned the config files. >>> Now it works like a charm. When I have time I will clean >>> up the scripts and post them to the list >>> >>> >>> On Tue, 23 Mar 2010 17:39:49 +0000 >>> Mark Beynon <[email protected]> wrote: >>> : I am running vol1, lab6 tasks1-5. Just finnishing configuring a >>> point >>> : to point frame relay link between routers 2 and 4 and the console >>> : locks up on router 2 every time. No exact moment, ie it's not one >>> : command or another.. Anyone experienced this? >>> : >>> : I'm having so many problems with dynamips. Quickly realised the >>> : mm-16esw won't support labs 2-5, and now can run lab6 due to >>> crashes. >>> : Would jump into proctor labs but I am operating in two to three >>> hour >>> : windows before work, which is a massive waste >>> : >>> : Sent from my iPhone >>> : _______________________________________________ >>> : For more information regarding industry leading CCIE Lab training, >>> please visit www.ipexpert.com >>> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, >> please visit www.ipexpert.com >> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
