Step 1. Dont use Windows. It is complete rubbish. With Dynamips is rubbish piled upon rubbish. You have a Mac. Use that.
Step 2. Sort out your idle-PC. Once I sorted my topology and idle-PC I was sorted. It has been over two years and my setup works on my home box and I have not needed to adjust a single thing. Step 3. No .net file will EVER work out of the box. I will not support the .net file on my website when other other people try to use it. Step 4. The dynamips specfic forums will give you more joy than here. With my IPExpert .net file, with my modifications, certain crashes always happen under certain conditions. I need to work around them, deal with them and go to other places that can help more than this forum. Good luck. Cheers, Matt CCIE #22386 CCSI #31207 On 20 March 2010 23:36, Iain Mc Girr <[email protected]> wrote: > Hi there i have imported the topology from my download folder and I > can start all the devices including the back bone routers > > However, the back bone routers just dont output to telnet at all just > hang as in not display anything. > > However, If I import a 2600 into GNS3 on its own and then start and > then telnet it works fine > > In short I am saying I am not getting any errors at all only that it > doesn't output to screen. > > I am taking the .net file from the technology focused lab by the way > > I am running bootcamp on a Macbook Pro with 4 gig or RAM the bootcamp > is windows 7 64 bit home Premium. > > I have even adjusted the idle PC to get around 20 27% with all routers > , Cat 1,2 and 3 aka 3725 and frame switch BUT nothing absolutely > nothing with the BB1 ,2 or 3 routers. > > I have looked at the net file and noted that there doesn't seem to be > idle PC values for them... > > Do I have the correct .net file or something ..anyone got a work around > > Many thanks > > Iain > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
