You can't emulate switches, so the Catalyst IOS will not work. Only regular IOS works. You can do some switching in the form of the NM-16ESW module in a router. Like Matt says, use show vlan-switch instead of show vlan. That is the correct command for displaying vlans on the NM.
You also would want the latest IOS for the 3725, to use the extended range VLANs and use global config for VLAN configuration. If you use a lower version or another platform, you still have to use the 'vlan database' to configure your vlans. -- Regards, Rick Mur CCIE2 #21946 (R&S / Service Provider) Sr. Support Engineer – IPexpert, Inc. URL: http://www.IPexpert.com 2009/10/23 Matt Hill <[email protected]> > That's because you need to use the command "show vlan-switch" ;) > It's different with NM-16ESWs and real switches. > > Use the ? key. Its the best thing in the whole world. > > Cheers, > Matt > > CCIE #22386 > CCSI #31207 > > 2009/10/23 ρ♥Я♥д♥Ð♥ΐ♥ρ♥ ρ <[email protected]>: > > Dear Team, > > > > I am using the GNS3 GUI interface but i am not able to get switch ios > kindly > > update for the same.. > > > > e.g if i put the command -- # sh vlan then it not shows any details of > vlan. > > > > Best Regards > > > > Pradip P > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
