you can try the following... this is just an example..
int s1/0 frame map ip 10.1.1.3 405 broadcast frame map ip 10.1.1.6 404 broadcast int s1/0.1 point-to-point ip addr 10.1.1.1 255.255.255.0 frame-relay interface-dlci 402 if you decide to use virtual-templates.. it will look something like this.. interface virtual-template 1 ip addr 20.20.20.1 255.255.255.0 > next go under the serial interface and map it to a dlce int s1/0 frame-relay interface-dlci 416 ppp virtual-template 1 Hope this helps Cedric ________________________________ From: Adrian Brayton <[email protected]> To: Mustafa Yadav <[email protected]> Cc: [email protected] Sent: Sat, October 24, 2009 12:43:40 AM Subject: Re: [OSL | CCIE_RS] 2 dlci in one point to point subinterface interface Serial0/0/0.1 multipoint ip address 10.1.1.1 255.255.255.0 frame-relay map ip 10.1.1.3 405 broadcast frame-relay map ip 10.1.1.2 402 broadcast HTHs On Oct 23, 2009, at 7:18 PM, Mustafa Yadav wrote: > hi all, > > Just a quick question ..can we use in a hub router onyl one > subinterface and more than one dlci ? > > can anyone give example of that? > _______________________________________________ > For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
