Michael, Good information you just sent!!! Thanks for the share.
-- Regards, Iwan Hoogendoorn CCIE #13084 (R&S / Security / SP) Sr. Support Engineer – IPexpert, Inc. URL: http://www.IPexpert.com On Sun, Oct 4, 2009 at 11:10 PM, Michael Lipsey <[email protected]> wrote: > So, I have been doing some MPLS practice and I noticed that a few of my > routers didn't support the MPLS command set. > > I'm running 12.4.25a on all of them with advanced IP services. > > My 2801s don't have 'mpls' in the base config mode as an option. > > I had R2 and R6 as 2801s but my R7 and R8 were a 3825 and 3845, I swapped > them around and am back in business but I just thought I would share this > info. > > It appears that my 2821s support it and besides the 2801s that is the lowest > router In my topology. It might require more moving things around as I do > have a few more 2801s in my topology but we'll see. I have some extra 2821s > and 3800s I can substitute. > > Mike > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > -- Regards, Iwan Hoogendoorn CCIE #13084 (R&S / Security / SP) Sr. Support Engineer – IPexpert, Inc. URL: http://www.IPexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
