Why are you changing the console speed for? The second you enter this (assuming you are connected via console) you will essentially lose your connection and only be able to change again via rommon.
The only real reasons to change the console speed are because debugs come too fast and you miss characters or you are trying to transfer an IOS over XMODEM. You should never need the former because that means you are running too many superfluous debugs and the latter is not necessary these days because the flash on most routers is removable and you can just copy it across using a card reader on a PC or via the USB port on the router itself. Cheers, Matt CCIE #22386 CCSI #31207 2009/9/29 Taqdir Singh <[email protected]>: > Could any1 please advise , why I am not able to change speed ? > > Router(config-line)#speed 10000 > Failed to change line 0's speed > Router(config-line)#speed 1000000 > Failed to change line 0's speed > Router(config-line)#speed 9600 > > version is 3640 > > -- > Taqdir Singh > Engineer- Network Administration > In pursuit of CCIE > M: (+91)- 991-170-9496 > > Do today what others won't so you can live tomorrow as others can't > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
