Guys be extremely careful with the distribute-list command in OSPF. Check out this FAQ from Cisco for more information. Remember, it is link-state so the LSDB must be the same across the area!
http://www.cisco.com/en/US/tech/tk365/technologies_q_and_a_item09186a0080094704.shtml#q12 On Wed, Jul 22, 2009 at 3:28 PM, Bodnar, Edward <[email protected]>wrote: > I would say as long and you look in your route table and you only see odd > routs then your ok. As long as they are not requiring you to use a > “prefix-list” you can do anything that works. > > > > I always try to do the easy way unless I am forced not to. Standard ACL’s > matched with distribute-list are what I use unless I have a reason not to. > > > > Ed, > > > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *khaled Saholy > *Sent:* Wednesday, July 22, 2009 3:23 PM > *To:* [email protected] > *Subject:* [OSL | CCIE_RS] VOL3 LAB7 OSPF Filtering - question to the > experts > > > > > > Dear Experts, > > I have some questions regading the VOL3 labs. So I'll start with lab7. > > In lab 7 , task 3.5 , the task is asking for R9 to receive only even > routes from BB2 via serial 0/2/0 only and the odd routes via serial 0/2/1 > only. The solutions in the proctor guide has been configured in R6 with two > long prefix-lists. I did the configuration in R9 with the (distribute-list > in) with the access-lists and it gave me the same result. > > > > Is my solution correct ? > > > > Thanks for the reply in advance. > > > > Khaled Al-Saholy > > > > > > > ------------------------------ > > See all the ways you can stay connected to friends and > family<http://www.microsoft.com/windows/windowslive/default.aspx> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > -- Regards, Joe Astorino - CCIE #24347 R&S Technical Instructor - IPexpert, Inc. Cell: +1.586.212.6107 Fax: +1.810.454.0130 Mailto: [email protected]
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
